T.O.P. Racing "Photon" 1/10 EP Touring Car
#1906
40/20=2
#1908
#1909
New upper deck Medium
#1911
#1912
Foam Kits
Hello Everyone,
Foam kits will be arriving next week. Contact [email protected] or have your hobby shop contact us to reserve a kit.
Foam kits come with:
Stiffer Main Chassis
Stiffer Top Deck
Stiffer Wings
Diff In The Front
This next batch of kits will also include 44.5mm dogbones. It will also include the flat black screws instead of the shiny (easy to strip) ones.
Foam kits will be arriving next week. Contact [email protected] or have your hobby shop contact us to reserve a kit.
Foam kits come with:
Stiffer Main Chassis
Stiffer Top Deck
Stiffer Wings
Diff In The Front
This next batch of kits will also include 44.5mm dogbones. It will also include the flat black screws instead of the shiny (easy to strip) ones.
#1913
If you can't wait for a rubber kit, you can purchase a foam kit and the optional rubber tire lipo chassis (2.0mm and no cut outs under the battery). The top deck can be easily modified by cutting the additional brace. You will also have to purchase a spool.
Rubber kits arriving September 1st.
Rubber kits arriving September 1st.
#1914
Aluminum Spool Outdrives
I took some aluminum spool outdrive samples from the machine shop last week and let people try them. Feedback was great. They are getting anodized this week and will be ready for purchase next week.
#1915
Tech Adept
Hi everyone, going to order the Photon Foam Spec soon(Tomorrow) and was just wondering what kind of pitch and teeth number is it on the Spur gear stock?
Last edited by Team_Elli; 08-19-2009 at 08:27 AM. Reason: Spelling probs:(
#1916
If you can't wait for a rubber kit, you can purchase a foam kit and the optional rubber tire lipo chassis (2.0mm and no cut outs under the battery). The top deck can be easily modified by cutting the additional brace. You will also have to purchase a spool.
Rubber kits arriving September 1st.
Rubber kits arriving September 1st.
#1917
Top Deck and Bulkhead Cover Screws
For those of you not getting on with the 1.5mm hex head in the counter sunk M2.5 kit screws, Titanium Racing have designed a M2.5 countersunk screw with a dome head that allows a 2.0mm hex driver to be used.
#1918
#1919
#1920
Tech Adept
Sorry Dbl. post