Tekin RS/RS PRO on 1s Lipo Q&A
08-17-2009, 09:57 AM
#211
Can someone shoot me the latest and greatest schematic for the RS 1S with booster setup?
From what I gather, I want to put the booster leads directly on the +/- leads of the battery and plug the other end into the bat port on the Receiver. From there set the RS up as a 1S unit. I'm not sure where the power switch is supposed to end up as: on or off. I don't want to smoke the new RS in my WGT car.
From what I gather, I want to put the booster leads directly on the +/- leads of the battery and plug the other end into the bat port on the Receiver. From there set the RS up as a 1S unit. I'm not sure where the power switch is supposed to end up as: on or off. I don't want to smoke the new RS in my WGT car.
With the 1S profile you can leave the switch to on with the RS if you want to use the voltage cut off feature. It works in either position.
08-17-2009, 09:59 AM
#212
Tech Master
iTrader: (21)
Can someone shoot me the latest and greatest schematic for the RS 1S with booster setup?
From what I gather, I want to put the booster leads directly on the +/- leads of the battery and plug the other end into the bat port on the Receiver. From there set the RS up as a 1S unit. I'm not sure where the power switch is supposed to end up as: on or off. I don't want to smoke the new RS in my WGT car.
From what I gather, I want to put the booster leads directly on the +/- leads of the battery and plug the other end into the bat port on the Receiver. From there set the RS up as a 1S unit. I'm not sure where the power switch is supposed to end up as: on or off. I don't want to smoke the new RS in my WGT car.
Photo below.
Hope this helps.
08-17-2009, 10:24 AM
#215
I know people have noticed a big difference using this ESC with TC setups etc.
Has anyone tried it with 1s lipo?
Does the extra timing and turbo etc still work well with 1s.
I also have some LRP SPX's but the high profiles don't seem to make any difference with the lower voltage.
Thanks
Skiddins
Has anyone tried it with 1s lipo?
Does the extra timing and turbo etc still work well with 1s.
I also have some LRP SPX's but the high profiles don't seem to make any difference with the lower voltage.
Thanks
Skiddins
08-17-2009, 06:13 PM
#217
Maybe this has been posted already, but what's a good rollout to start with for: CRC GenX, 1S TP lipo, Tekin 17.5 w/12.5mm rotor, Tekin RS ESC, on a 80X40 carpet track?
08-17-2009, 06:59 PM
#219
08-17-2009, 07:00 PM
#220
I know people have noticed a big difference using this ESC with TC setups etc.
Has anyone tried it with 1s lipo?
Does the extra timing and turbo etc still work well with 1s.
I also have some LRP SPX's but the high profiles don't seem to make any difference with the lower voltage.
Thanks
Skiddins
Has anyone tried it with 1s lipo?
Does the extra timing and turbo etc still work well with 1s.
I also have some LRP SPX's but the high profiles don't seem to make any difference with the lower voltage.
Thanks
Skiddins
08-19-2009, 11:46 AM
#221
anyone have a pic of the crc genx-10 with the esc mounted in the middle using the new 1s esc plate?
08-19-2009, 01:39 PM
#223
I am talking about this:
http://teamcrc.com/crc/modules.php?n...prodID=7719044
you probably thought I meant for the 1s cell itself
that would be cool!
http://teamcrc.com/crc/modules.php?n...prodID=7719044
you probably thought I meant for the 1s cell itself
that would be cool!
08-21-2009, 11:02 AM
#224
For this whole 1S lipo thing in 1/12, I am assuming this one works fine for the RS just the same as the RS Pro. Does anyone got a breakdown of the current accepted method to get all of this work (ie- buy this booster, set this setting in the ESC, hook up this first, etc). Also pics of your setups would be great.
08-21-2009, 01:32 PM
#225
I am talking about this:
http://teamcrc.com/crc/modules.php?n...prodID=7719044
you probably thought I meant for the 1s cell itself that would be cool!
http://teamcrc.com/crc/modules.php?n...prodID=7719044
you probably thought I meant for the 1s cell itself
that would be cool!