Tamiya TRF415
#7757
Tech Elite
iTrader: (13)
Join Date: Sep 2001
Location: Land of the Free, Home of the Brave
Posts: 2,928
Trader Rating: 13 (100%+)
Originally posted by dawgmeat
3mm, I plan on bashing Raul Garica new RDX tonite at hobby chamber
3mm, I plan on bashing Raul Garica new RDX tonite at hobby chamber
#7758
Setup Question:
What does it do when you put inboard toe out on the front end.
For example : XB rear front & B front front (2° in board toe out), then you set the front at 0° toe.
What is the effect on the car handling?
What does it do when you put inboard toe out on the front end.
For example : XB rear front & B front front (2° in board toe out), then you set the front at 0° toe.
What is the effect on the car handling?
#7761
415
Gonna run this thing for the 1st time tonight. Wish me luck, I have never ran a one-way before. Should be interesting to say the least.
#7762
Tech Master
iTrader: (6)
Originally posted by F. Alonso
That's the swept arms setup, I'm going to try that out too, just bought the blocks the other day. One of the final runs with the Evo IV before I sell it, to get 415MS!!!! Should be AWESOME in Modified!
That's the swept arms setup, I'm going to try that out too, just bought the blocks the other day. One of the final runs with the Evo IV before I sell it, to get 415MS!!!! Should be AWESOME in Modified!
Don't have a mod motor though.
#7764
Tech Champion
iTrader: (79)
Bashing HUH?
Originally posted by dawgmeat
3mm, I plan on bashing Raul Garica new RDX tonite at hobby chamber
3mm, I plan on bashing Raul Garica new RDX tonite at hobby chamber
Dawgmeat, I dont hear anything are you still breathing. 150.00 for that KAI, didnt seem to help you at all
#7765
Tech Elite
iTrader: (9)
Re: Bashing HUH?
Originally posted by Raul Garcia
Well let me say this. Not that the TRF 415v is not nice, but I have gone over 1 1/2 laps faster OUT OF THE BOX with my new toy. Dont Hate! Sorry guys. I could not do this with my 415 setup to the gills. See ya .
Dawgmeat, I dont hear anything are you still breathing. 150.00 for that KAI, didnt seem to help you at all
Well let me say this. Not that the TRF 415v is not nice, but I have gone over 1 1/2 laps faster OUT OF THE BOX with my new toy. Dont Hate! Sorry guys. I could not do this with my 415 setup to the gills. See ya .
Dawgmeat, I dont hear anything are you still breathing. 150.00 for that KAI, didnt seem to help you at all
#7767
The 415MS is up there in price with the Corally RDX
#7768
Re: Re: Re: Dawgmeat signs deal with TRF and get his own carpet version
Originally posted by dawgmeat
Tamiya rear
Square front
Tamiya rear
Square front
#7769
Loctite on metal to metal parts
I have two questions:
One, I am looking for a good carpet rubber stock / 19T set-up for a 415 MS and almost all of the set-ups that I see out here are for the 415. Does anybody have any good 415 MS carpet rubber set-ups?
Two, when assembling your 415 MS are you using Loctite on all of the metal-to-metal parts (i.e. pivot blocks, chassis parts etc.)? I did this on my EVO III and it seemed like it kind of ruined the hardware.
KHal
One, I am looking for a good carpet rubber stock / 19T set-up for a 415 MS and almost all of the set-ups that I see out here are for the 415. Does anybody have any good 415 MS carpet rubber set-ups?
Two, when assembling your 415 MS are you using Loctite on all of the metal-to-metal parts (i.e. pivot blocks, chassis parts etc.)? I did this on my EVO III and it seemed like it kind of ruined the hardware.
KHal
#7770
Tech Elite
iTrader: (13)
Join Date: Sep 2001
Location: Land of the Free, Home of the Brave
Posts: 2,928
Trader Rating: 13 (100%+)
Damn I am getting frustrated with this car.
So many problems. I think it is time to switch. Anyone want to buy my 415?
So many problems. I think it is time to switch. Anyone want to buy my 415?