Tamiya TRF415
#5311
Originally posted by Ballsie
How do you find the ceramics - are they much smoother than even the tungsten ones? I've heard they really eat into the diff rings tho.
How do you find the ceramics - are they much smoother than even the tungsten ones? I've heard they really eat into the diff rings tho.
-Dave
#5312
Tech Champion
iTrader: (4)
Originally posted by racer
what would be the average droop settings for carpet front/rear?
would it be ideal to have the front/rear setting even?
larger droop at the front than the rear and vice versa?
any help would be greatful.
Thanks!
what would be the average droop settings for carpet front/rear?
would it be ideal to have the front/rear setting even?
larger droop at the front than the rear and vice versa?
any help would be greatful.
Thanks!
I had been running #4 front and #5 rear on my car for a while, but I've now switched to #4 on both ends. thats measured with a yokomo gauge on the same point on the outer pins on the suspension arm
Basically if you need more front end into the turn, increase the amount of droop on the rear. If you need more front out of the turn, decrease the amount on the front (restricting weight transfer to the rear, reducing the rear grip).
HiH
Ed
#5313
Originally posted by JDM_DOHC_SiR
Hara Used a EXCEL Accord body along with 90% of the Other A-Main drivers.. there is a slight difference on the shape of the front lip and hood line on the Excel Accord...and the Rear wing is different
-Dave
Hara Used a EXCEL Accord body along with 90% of the Other A-Main drivers.. there is a slight difference on the shape of the front lip and hood line on the Excel Accord...and the Rear wing is different
-Dave
#5314
Tech Regular
Originally posted by kentech
One more with the electronics installed.
One more with the electronics installed.
Chazz
#5315
Tech Regular
Can you use associated tc3/4 springs on the 415 and IV, wanna know as i'm considering one of these two cars and cannot find a website which sells tamiya springs online
Chazz
Chazz
#5316
Yes you can use Associated Springs no problem.
#5317
Tech Regular
Oh good, at least that's one thing i don't have to worry about if i get a tamiya
Chazz
Chazz
#5318
R/C Tech Elite Member
iTrader: (47)
Re: TRF415MS pictures
Originally posted by kentech
I promised some better pictures earlier. Here they are.
I promised some better pictures earlier. Here they are.
All that blue, it looks soooo good.
#5319
R/C Tech Elite Member
iTrader: (47)
Re: Ceramic Diff Balls
Originally posted by Ballsie
Has anyone tried the Xenon Racing ceramic diff balls or any kind of ceramic diff balls?
What kind of lubrication do you use with them
Cheers
Has anyone tried the Xenon Racing ceramic diff balls or any kind of ceramic diff balls?
What kind of lubrication do you use with them
Cheers
#5320
R/C Tech Elite Member
iTrader: (47)
Originally posted by Chazz
Can you use associated tc3/4 springs on the 415 and IV, wanna know as i'm considering one of these two cars and cannot find a website which sells tamiya springs online
Chazz
Can you use associated tc3/4 springs on the 415 and IV, wanna know as i'm considering one of these two cars and cannot find a website which sells tamiya springs online
Chazz
#5322
Servo Horn
From which manufacturer is the servo horn (aluminium blue) that M.Rheinard and S.Maezumi were using at the worlds.
I can see in the pictures that is a long one.
Thanks
I can see in the pictures that is a long one.
Thanks
#5323
R/C Tech Elite Member
iTrader: (47)
Re: Servo Horn
Originally posted by Hugo
From which manufacturer is the servo horn (aluminium blue) that M.Rheinard and S.Maezumi were using at the worlds.
I can see in the pictures that is a long one.
Thanks
From which manufacturer is the servo horn (aluminium blue) that M.Rheinard and S.Maezumi were using at the worlds.
I can see in the pictures that is a long one.
Thanks
#5325
Re: Re: Servo Horn
Originally posted by Randy Caster
Im not sure who made the one they are running, but check on Speedtech's site under servos and they have one that looks like it could be it.
Im not sure who made the one they are running, but check on Speedtech's site under servos and they have one that looks like it could be it.
Does someone have the one from racer's edge?