3LikesTamiya TRF415
10-13-2004, 04:38 AM
#4261
excellent - thanks! 
10-13-2004, 06:30 AM
#4262
Tech Apprentice
diff mod
For people who used the YOK diff for the front, how does it hold up? Any problems running the plastic outdrives in mod?
10-13-2004, 10:46 AM
#4265
Tech Apprentice
Thanks for the response guys, now to locate those outdrives. 
10-13-2004, 11:15 AM
#4266
Originally posted by Leini
ok, tell me about your test then....
ok, tell me about your test then....
it seems you´re here more often now
10-13-2004, 12:37 PM
#4267
Thanks for the info is that setup with the long arm set on the 415
Originally posted by Leini
@hugo:
there are different ways to messure the droop. on a medium traction asphalt track i drive almost the same droop front and rear. prettx less. i can lift the car 1 or 1,5mm then the tyres loose the ground contact.got me?
setup:
front
blocks a/a
caster 2degr
camber 1 or 1,5
no toein/toeout
dampers: 40/2 hole with tamiya yellow or asso silver
wheelbase1,7mm front of susp.arm, 6mm behind
no anti squat, rollcenter
damp.pos.:damper stay outside, arms outside of the 2 holes
rear:
blocks x/b or c (with 1degr. tamiyaalu hub c.)
camber1 or 1,5
dampers 40/2 holes, same springs
wheelbase5 front, 2,3 behind
no anti s, or rollc.
damp.pos.:damper stay outside (hole #5), arms insideof the 2 holes
no anti roll bars. i use the mazda.
hope this works on your track...
@hugo:
there are different ways to messure the droop. on a medium traction asphalt track i drive almost the same droop front and rear. prettx less. i can lift the car 1 or 1,5mm then the tyres loose the ground contact.got me?
setup:
front
blocks a/a
caster 2degr
camber 1 or 1,5
no toein/toeout
dampers: 40/2 hole with tamiya yellow or asso silver
wheelbase1,7mm front of susp.arm, 6mm behind
no anti squat, rollcenter
damp.pos.:damper stay outside, arms outside of the 2 holes
rear:
blocks x/b or c (with 1degr. tamiyaalu hub c.)
camber1 or 1,5
dampers 40/2 holes, same springs
wheelbase5 front, 2,3 behind
no anti s, or rollc.
damp.pos.:damper stay outside (hole #5), arms insideof the 2 holes
no anti roll bars. i use the mazda.
hope this works on your track...
10-13-2004, 01:25 PM
#4269
It is the new suspension.
10-13-2004, 01:26 PM
#4270
Tech Regular
Hi, i was wondering if the suspension arms/wishbones are the same front and rear left and right
Chazz
Chazz
10-13-2004, 01:29 PM
#4271
Tech Regular
Also if the suspension arms come in a pair or on their own like the xrays
Chazz
Chazz
10-13-2004, 03:07 PM
#4273
v12, it looks like....
samstag werde ich nochmal in auheim die aufhängungen vergleichen,dann poste ich nochmal meine grandiosen erfahrungen.
o sorry guys....
samstag werde ich nochmal in auheim die aufhängungen vergleichen,dann poste ich nochmal meine grandiosen erfahrungen.
o sorry guys....
10-13-2004, 03:21 PM
#4274
Old suspension arms are sold as a complete set (4arms) for around $16. The LW arms are sold with 1 front arm and 1 rear arm.
