1/10 R/C F1's...Pics, Discussions, Whatever...
#8733
#8734
#8735
Tech Elite
iTrader: (8)
F103 Camber Modification
Materials - Carbon reinforced plastic front suspension.
Step 1 Disassemble front suspension.
Step 2 Cut the center posts out using either a hack saw blade or dreamel tool.
Step 3 Once the center posts are cut out, use a small file to make the surface flat.
Step 4 Take a body reamer or a small diameter file and remove some material from ONLY the lower arm kinpin holes. If you don't do this step, your suspension will bind at the lower kingpin hole when your suspension is compressed.
Step 5 Select the amount of spacers for the desired camber.
It took me only 5-10 minutes to do, and now I have adjustable camber from 0.0 to -2.5 degrees.
Hope this helps you out.
Oh, forgot to mention. This modification is quite popular over here in Japan. Most guys running F103's and 4's use this front suspension setup. Get on it and be the first in North America.
Materials - Carbon reinforced plastic front suspension.
Step 1 Disassemble front suspension.
Step 2 Cut the center posts out using either a hack saw blade or dreamel tool.
Step 3 Once the center posts are cut out, use a small file to make the surface flat.
Step 4 Take a body reamer or a small diameter file and remove some material from ONLY the lower arm kinpin holes. If you don't do this step, your suspension will bind at the lower kingpin hole when your suspension is compressed.
Step 5 Select the amount of spacers for the desired camber.
It took me only 5-10 minutes to do, and now I have adjustable camber from 0.0 to -2.5 degrees.
Hope this helps you out.
Oh, forgot to mention. This modification is quite popular over here in Japan. Most guys running F103's and 4's use this front suspension setup. Get on it and be the first in North America.
Last edited by EDWARD2003; 06-20-2013 at 07:05 AM.
#8741
Tech Apprentice
#8742
Yea daft punk was Monaco 2013 I liked the 2012 Monaco car with angry birds and 500 races would post a picture but haven't figured out how to yet lol.
And a big thank you to the paintlab for sending the mclaren decals great job mate will be using you again
And a big thank you to the paintlab for sending the mclaren decals great job mate will be using you again
#8743
F1Piantlab Lotus E21 decals
If I can, maybe before it is finally printed, only for a maximum yield, add the sponsors that I still missing: RICHARD MILLE (front body); LOTUSF1TEAM.COM (side), a pair of smaller BURN logo (above radiators); MICROSOFT DYNAMICS (rear wing), AGT, logo COLUMBIA RECORDS (tail of the machine) and the logo of AUDEN MCKENZIE GROUP (front body).
I know the hard work of F1Paintlab and here in Italy I use its fantastic decals, and I would like the dacals of Lotus E21 are as complete as possible.
Thanks and good job!
I know the hard work of F1Paintlab and here in Italy I use its fantastic decals, and I would like the dacals of Lotus E21 are as complete as possible.
Thanks and good job!
Last edited by Kappe; 06-20-2013 at 05:00 PM.
#8744
Tech Elite
iTrader: (24)
If I can, maybe before it is finally printed, only for a maximum yield, add the sponsors that I still missing: RICHARD MILLE (front body); LOTUSF1TEAM.COM (side), a pair of smaller BURN logo (above radiators); logo COLUMBIA RECORDS (tail of the machine) and the logo of AUDEN MCKENZIE GROUP (front body).
I know the hard work of F1Paintlab and here in Italy I use its fantastic decals, and I would like the dacals of Lotus E21 are as complete as possible.
Thanks and good job!
I know the hard work of F1Paintlab and here in Italy I use its fantastic decals, and I would like the dacals of Lotus E21 are as complete as possible.
Thanks and good job!
I will see if I can come up with the daft punk logo
#8745
Tech Apprentice
That would be awesome, I have a TRF101 coming and I wanted to do a Lotus paint scheme. Please let me know if you do so I can be sure to order that version