1/10 R/C F1's...Pics, Discussions, Whatever...
#4756
Figured I would start here since this forum is more active than the Exotek forum. I am about to build a Exotek F1R and I wanted to get a gearing recommendation if i could. My gear with either be the 93 Tamiya Spur or and 88t or 84t aftermarket spur that holds 12 balls. Its an asphalt track 170x68. thanks in advance
If brushless blinky or boosted?
I would ditch the tamiya gears. Most people I know have issues with them. Plus the extra balls in the diff always helps.
#4758
Personally I never had any issues with tamiya pitch and I use 64p for my f104 (which is very similar to the tamiya pitch). Though I was definitely the exception at my track.
For 21.5 blinky and that size track I would start at 2.5:1 ratio and go down from there. I'm running that with a team epic revtech 21.5 on a similar sized track.
For 21.5 blinky and that size track I would start at 2.5:1 ratio and go down from there. I'm running that with a team epic revtech 21.5 on a similar sized track.
#4759
On the F104 bodies, do you guys use shoo goo or servo tape to attach the side pods and miscellaneous body pieces?
Currently cutting out my Ferrari F60 body.
Currently cutting out my Ferrari F60 body.
#4760
#4761
#4762
Tech Elite
iTrader: (24)
Just in case you were not aware, here are the latest decal offerings from the Paintlab
They can all be found in the decal section athttp://f1paintlab.com/zencart
They can all be found in the decal section athttp://f1paintlab.com/zencart
#4763
Tech Elite
iTrader: (24)
There is a lot more coming very soon. But due to the fact that I am 1 guy and I havent figured out how to create time yet, I need to jump back on the body painting and chassis building activities. Do note though that if I have a body job that requires a decal sheet that I dont do yet, I will create it for that job and have it available for sale almost instantly.
#4764
Tech Champion
What is that last Lotus one? I don't recognize it.
Any plans to do one with striping for the FGX?
Any plans to do one with striping for the FGX?
#4767
Tech Elite
iTrader: (24)
I also have the sheets done for the missing McLaren decals. I used them to do this one
and a close up of the cockpit
The Benetton B188/89 sheets are also done, but the first print that I ran the green was way too dark, so I went in and changed the color. As soon as I run another one I will post a picture
and a close up of the cockpit
The Benetton B188/89 sheets are also done, but the first print that I ran the green was way too dark, so I went in and changed the color. As soon as I run another one I will post a picture
#4768
#4769
Tech Champion
Ah I see...never really realized that...cool...
So how bout them stripes for the FGX nose?
So how bout them stripes for the FGX nose?