rayhuang

iTrader: (5)

Robert,

I want to make sure I am telling my buddy who bought a Helios today the right info!!

For a car with a Digital Servo, Novak Synthsized receiver, he wants to run the radio in 3ch and Normal mode on switch-correct?

He will have one car with the 302 rx and we know how to set-it up. But one car wil have the NOvak for about a week or two. I dont want him glitching before he buys the other 302 RX!!

Thanks,
Ray Huang
p.s. My Helios has run without a hiccup since you fixed the antennae!!

V12

iTrader: (1)

Thanks.

KO PROPO Staff

Ray-
The radio can be in High response BUT must be in 3 CH mode. This is the same performance as the Mars R. If you want to use the Normal mode it does not matter if it is in 2 or 3 CH mode. This is the same performance as the Mars.

That receiver will not work in the High response 2 CH mode.

Going to the Electric paved nats? If so, see you there.

=MisFitz= NuKe

robert, im prolly going to have you bring me some stuff to the nats, along with my speedo (if you were able to fix it). I will call you when i know what it is i need.
-Mike

RCGaryK

iTrader: (3)

Robert, I tested out my hyperbooster like how you told me to at the RROC, and it does nothing. Is there any other way you can test it out? Should I bring it with me to Portland?

KO PROPO Staff

Gary,
You can bring it there and I'll take a look at it.

=MisFitz= NuKe

Robert,
any word on my speedo?

RCGaryK

iTrader: (3)

will do. Thanks Robert.

tornado

Robert, I've wanna to make a pc link cable for my VFS. I've got the connectors but to which of the nine pins on the connector to the pc? Please help.

Thanks

John_S

i dont think you can make them because the cable has a circuit board in it and is more than jsut a 9 pin conecter

rc-zombies

iTrader: (9)

I have the cable...don't try it... the cable has a circuit board on it.

KO PROPO Staff

tornado-
You can not make this connection, just like everyone else has said. It is a little more detailed than just connecting wires.

tornado

Ok! don't wanna fry my priced posession.

Thanks for the help.

Fred Perkins

iTrader: (264)

I was having some problems burning P94 brushes so I tryed all kinds of profiles. I finally tried the Quantum profile 3200 htz and it seemed to work. Any one know witch way to go from here? up or down to make it even better?

John_S

hi i have fried my ko twice since i got it for no apparent reason and was jsut wodnering if anyone else has encountered this i put it down after a race and then come to use it in the next race to find it isnt working the first time i had it fixed it cost me about 20 pounds (15 of which was labour ) and im just not really into tempremental equipment. Its not like im thrashing the thing because i have it set on the highest number in the throttle program (possibly 25)