TRF414M, 404x, 414, 414X
#2956
Tech Initiate
I have two TB EVO 3 (Surikarn Limited), including a set of ceramic bearings, lightweight axles, shaft, etc for sale. If someone is interested, drop me a line.
#2957
Tech Addict
iTrader: (27)
Originally posted by rtypec
You can try a kimbrough servo saver or if you're feel like playing with the Tamiya Hi-Torque servo saver you can try this little tip I posted on a formula one site.
"What you do is you cut a 3-4mm strip of plastic maybe 15mm long from a plastic bag that parts come in. Then you fold it over 2-3 times and before you bolt the servo saver together, jam it between the notched parts of the servo saver. It should be a tight-puffy fit but once you get the screw through it and into the servo, it should cinch up and create a slop free servo saver. Of course, if you're at the world's you have to use a Tamiya Plastic Bag ha!"
Hope this helps.
You can try a kimbrough servo saver or if you're feel like playing with the Tamiya Hi-Torque servo saver you can try this little tip I posted on a formula one site.
"What you do is you cut a 3-4mm strip of plastic maybe 15mm long from a plastic bag that parts come in. Then you fold it over 2-3 times and before you bolt the servo saver together, jam it between the notched parts of the servo saver. It should be a tight-puffy fit but once you get the screw through it and into the servo, it should cinch up and create a slop free servo saver. Of course, if you're at the world's you have to use a Tamiya Plastic Bag ha!"
Hope this helps.
cheers mate
#2959
Tech Adept
that is one sweet ride!!!
#2960
nice!
414.5 pretty nifty
414.5 pretty nifty
#2961
very, very nice job. is that a custom chassis?
very atlas type t, no? i too am awaiting the 415. it looks killer. that 414.5 looks like it will run well too.
for now i'll have to play with my si, as it resembles the 415...and i'm broke.
very atlas type t, no? i too am awaiting the 415. it looks killer. that 414.5 looks like it will run well too.
for now i'll have to play with my si, as it resembles the 415...and i'm broke.
#2962
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
Very nice looking car. If the 414 was like that when it came out I would more than likely be running it. You did a great job with it.
#2964
Tech Legend
iTrader: (51)
Join Date: Sep 2001
Location: Castle Mamba Max Pro. Feel its power!!!!!!!!!!
Posts: 21,220
Trader Rating: 51 (100%+)
What company makes that chassis if I can ask? Is it a comapny from where you live? I bet my buddy would be interested in one fo those.
#2966
wow.. that car gotta cost you some pretty pennies! There are tons of aftermarket parts on it... the Racy bumper brace. f/r bulkheads.... the custom chassis... wow....
I wonder if you can send that chassis to penguine RC and have them duplicate it for you so you can sell it on the rctech. I bet a lot of people would buy it from you.
I wonder if you can send that chassis to penguine RC and have them duplicate it for you so you can sell it on the rctech. I bet a lot of people would buy it from you.
#2967
like me!
#2969
lol i want to knwo that too
#2970
Tech Adept
hey guys,
what are all the available belts for the 414 m2 i'm looking for the most efficient belts front and rear and part number if u have it thanks,
the one i bought was (53463front low friction belt) wasnt verry narrow at all.
2nd is there an adjustable rear toe pieceses or suspension block without going to the evo3 parts as it changes the roll ctr?.yep i bought the ta04 adjustable suspension pieceses and didnt fit any one needs the set cheap?25shipedand throw in brand new ta04 rear belt that also didn't fit haha..
also those nylon bulkheads where can i get them websight please? thanks for your help.
what are all the available belts for the 414 m2 i'm looking for the most efficient belts front and rear and part number if u have it thanks,
the one i bought was (53463front low friction belt) wasnt verry narrow at all.
2nd is there an adjustable rear toe pieceses or suspension block without going to the evo3 parts as it changes the roll ctr?.yep i bought the ta04 adjustable suspension pieceses and didnt fit any one needs the set cheap?25shipedand throw in brand new ta04 rear belt that also didn't fit haha..
also those nylon bulkheads where can i get them websight please? thanks for your help.