Tekin RS ESC sensored
04-15-2010, 06:49 PM
What in the world are you running? The newest version [203] has the broadest setup/gearing "sweet spot" to date that I've run.
200 was fast but could be touchy when it comes to being fast without burning up
198 was quick, but pretty narrow on setup to keep heat under control
189 was quick, but you'd better temp often and adjust quickly to keep the heat down
183 is pretty much a no-brainer on setup, but a lot like a GTB when it comes to stock class power
We could NOT run 203 for TCS. We had to run 200 or earlier versions.
04-15-2010, 08:05 PM
I still stand by my answer though, 200 would be your best bet. The best way I found with v200 was to tweak it in is with zero turbo, gear and boost for best infield, then use enough turbo to see a difference, adjust your turbo delay for a consistent engagement point on the straight, then adjust turbo up or down until you're happy with the temps. I saw a few motors get toasted on v200 from people scrapping their entire hotwire profile and gearing to try and shortcut by using someone else's profile without matching gearing or driving style. I made the same mistake briefly and caught my motor at around 200* but luckily before it fried
198 was extremely touchy to dial in for me. Just changing driving line or being more aggressive on my driving could sometimes jump the temps up 40* with no other gearing or setup changes.
189 would be too slow on anything but a very slick track, IMO.
What kind of motor and settings were you losing motors with?
04-16-2010, 12:48 AM
I soldered it to the terminal and all is working correct now.
Thanks for your help.
Regards
Gary
04-16-2010, 12:53 AM
You were right, the white wire had broken in the receiver plug but the wire insulation was still crimped in the terminal, must have been just touching when I pluged it into the receiver.
I soldered it to the terminal and all is working correct now.
Thanks for your help.
Regards
Gary
I soldered it to the terminal and all is working correct now.
Thanks for your help.
Regards
Gary
glad u are sorted!!
04-16-2010, 01:36 AM
NEW SOFTWARE FOR TEKIN
Hello
Hope some one can help, I heard wispers about v209 coming out, true or false?
Cheers Inadvance
Spence
Hope some one can help, I heard wispers about v209 coming out, true or false?
Cheers Inadvance
Spence
04-16-2010, 03:18 AM
04-16-2010, 04:02 AM
Hey there guys whats good settings for the redline 17.5, engine timing on the motor itself and the settings on the Tekin rs, my fdr is 6.5, should i go to 6.0 or leave it at 6.5.
Cheers
Cheers
04-16-2010, 05:01 AM
i could be off alittle on my setting as i was working on 5-6 esc setups and was getting a little lost on what my own where
17.5 TC
fdr 6.5
motor 12
timing boost 52
turbo 7
delay .4
ramp 2
start 3xxx
end 14500
17.5 TC
fdr 6.5
motor 15
timing boost 50
turbo 7
ramp 2
start 4xxx
end 15500
17.5 needs a little bottom snap and try gearing ran in the main worked as good second setup with more straightaway speed
fdr 6.5
motor 18
timing boost 50
turbo 10
start 5xxx
end 16500
all with 0.4 delay
13.5 1/12
fdr 37/87 full BSR tire (62.xx roll out i think)
motor 12
timing boost 50
start 3xxx
end 8000
turbo 6
delay .4
ramp 2
moderate to low temp i only got to run for practice i had issue's and ran TC but it was very fast
17.5 TC
fdr 6.5
motor 12
timing boost 52
turbo 7
delay .4
ramp 2
start 3xxx
end 14500
17.5 TC
fdr 6.5
motor 15
timing boost 50
turbo 7
ramp 2
start 4xxx
end 15500
17.5 needs a little bottom snap and try gearing ran in the main worked as good second setup with more straightaway speed
fdr 6.5
motor 18
timing boost 50
turbo 10
start 5xxx
end 16500
all with 0.4 delay
13.5 1/12
fdr 37/87 full BSR tire (62.xx roll out i think)
motor 12
timing boost 50
start 3xxx
end 8000
turbo 6
delay .4
ramp 2
moderate to low temp i only got to run for practice i had issue's and ran TC but it was very fast
04-16-2010, 06:02 AM
Tech Apprentice
yes. you hardly have any timing. what yoou have is a bunch of turbo.. set the timing to more like 40-45 and the turbo to more like 10.. then when you recalibrate your speedo after applying the settings, set your epa to 90% of full, calibrate, then turn it up to 100%... also your not showing an end rpm and your start is a wee low..
04-16-2010, 06:26 AM
Ooh err. Are you meant to recalibrate your speedo (to the transmitter??) every time you change an ESC setting? I thought you only had to do this after making a change in Transmitter settings. I must say I have made changes that have made a difference but am I not getting the full benefit?
04-16-2010, 06:58 AM
Need setup asap for novak ballistic 17.5 on carpet track 80x30 with high grip
04-16-2010, 08:48 AM
Got my system working on my 17.5 Duo 2
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
04-16-2010, 09:02 AM
Raise your start to 3000. That should give you you what you are looking for.
Got my system working on my 17.5 Duo 2
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
04-16-2010, 09:02 AM
Got my system working on my 17.5 Duo 2
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
WAY FAST!!!
just wondering how do i get more bottom end punch
right now i have
FDR 7.8
end rpm 7500
start 1500
TP 4
turbo 12
timing 50
ramp - 3
delay .1
i turned up the ramp, lowered the delay and upped the gearing and that helped alot with the bottom end - just wondering if there is anything else I can do - I guess im just trying to get it to "feel" like my spx but still have tis insane top end
End RPM 10500 - 12000
Start RPM 5500 - 7000
TP 5
Turbo Boost 12
Timing Advance 50
Turbo Ramp - 2
Turbo Delay .5
OR
End RPM 15000
Start RPM 5000
TP 4
Turbo Boost 12
Timing Advance 50
Turbo Ramp - 2
Turbo Delay 0
04-16-2010, 10:02 AM
+1