Tekin RS ESC sensored
Tech Regular
iTrader: (8)
Tech Master
iTrader: (2)
Team EAM
iTrader: (79)
Tech Fanatic
iTrader: (37)
Good day!
I thought I read that they are working on a software update that will let you save your settings as a file or something to that efect.
I thought I read that they are working on a software update that will let you save your settings as a file or something to that efect.
Tech Lord
iTrader: (103)
yes randy did say that,as of know i think updates are going to be little tweaks that we all have asked
Tech Adept
The SP is a good motor bud the other motors are faster.
The SP is also not as smooth as the other motors. The Tekin is verry smooth.
I use in all boosted classes a Tekin motor because it is better than the SP. I have also a 13,5T sp. My laptimes are a bit slower with it.
The SP is also not as smooth as the other motors. The Tekin is verry smooth.
I use in all boosted classes a Tekin motor because it is better than the SP. I have also a 13,5T sp. My laptimes are a bit slower with it.
Yes there are software updates in the works that allow storeable profiles. These can then be shared various ways between racers.
Lucky people that managed to come say Hi at birds also were shown the new motors....
Lucky people that managed to come say Hi at birds also were shown the new motors....
Tech Lord
iTrader: (103)
you didnt show me
Hey guys, looking for a starting point for 1/12th mod with an LRP X12 6.5. The guys want to run mod tomorrow. I was going to just run my 10.5 as that thing is dialed but a friend has the 6.5 I can borrow. So what's a good starting roll out and will I want any boost or turbo with a 6.5.
Track is a tight carpet track, medium grip.
Track is a tight carpet track, medium grip.
Tech Adept
Hey guys, looking for a starting point for 1/12th mod with an LRP X12 6.5. The guys want to run mod tomorrow. I was going to just run my 10.5 as that thing is dialed but a friend has the 6.5 I can borrow. So what's a good starting roll out and will I want any boost or turbo with a 6.5.
Track is a tight carpet track, medium grip.
Track is a tight carpet track, medium grip.
I use only 20 Boost no Turbo
Start rpm 10000 and end RPM 22000 if I'm right. Some one els dit my setup for the LRP X12.
With the LRP X11 4,5 I use this 30 Boost no Turbo
Tech Champion
iTrader: (34)
Hey guys, looking for a starting point for 1/12th mod with an LRP X12 6.5. The guys want to run mod tomorrow. I was going to just run my 10.5 as that thing is dialed but a friend has the 6.5 I can borrow. So what's a good starting roll out and will I want any boost or turbo with a 6.5.
Track is a tight carpet track, medium grip.
Track is a tight carpet track, medium grip.
HW vers 212
Dual Mode
Timing Advance Full
Start Rpm 10K
End Rpm 20K
roll=54-56mm
LRP 6.5 Octa Wind
#2 timing insert
On a small carpet track (90x45), it temps about 125f, and runs strong for at least 10mins
This is actually better than the 10.5 with boost, turbo or both imo.
Dual Mode is so much smoother, and the 6.5 is about perfect for it.
The 10.5 is too slow for dual mode with 1s.
Last edited by RedBullFiXX; 02-04-2011 at 11:56 AM.
I thought the rpm settings didn't work in dual mode? I'll certainly give it a try.
Tech Lord
iTrader: (103)
i have problems wif my esc
it started with no turbo some time it detect some times its not temp is only around 50 degree on the motors and 2 light blinking ing the esc so meaning thats not hot then it come with have signal and then no signial in my radio atfer that i try to bind the esc again it started to smoked fom the esc ...pls help me so do i return the esc or how ??