Tekin RS ESC sensored
Drop your turbo to 12, drop your motor timing to 0 and drop your turbo ramp to 2.0
Go drive the car.
Tech Addict
I am racing 17.5T, not 13.5T, but I got around 75 degrees of timing in my setup using a Speed Passion V3 (10 endbell, 50 boost, 15 turbo, 5k start, 15k end, Turbo ramp 3) and got low temps (50c after 6 min) geared at 5.7. I have experienced great temps and no power bog.
Wow you must be racing in a fridge or something. Setting like that would kill my duo 2 17.5 in 5 mins.
Tech Addict
I have slowly added more timing and kept a close eye to the temps. With these settings I am reaching 50c / 120F after 6 min. This is indoor carpet racing, with an air temp at 18c / 64F.
Tech Master
There is a reason the pro's don't run massive timing.....
Tech Addict
Having low temps doesn't mean the motor is working well though. With all of the timing business, you are looking for a balance between speed and acceleration. I'd suggest you may have speed, but could get a lot more acceleration by dropping the guts out of the timing.
There is a reason the pro's don't run massive timing.....
There is a reason the pro's don't run massive timing.....
Tech Master
iTrader: (19)
Hi guys, what is the lowest turn motor I can run in touring car with the tekin rs. Not rs pro
Tech Lord
iTrader: (103)
7.5, 6.5 is pushing it
Tech Master
iTrader: (3)
Tech Fanatic
iTrader: (18)
Tech Fanatic
iTrader: (37)
Tech Fanatic
iTrader: (18)
Tech Fanatic
iTrader: (18)
From Tekins web site.
Controls: Forward/Brake/Reverse
ON Resistance: 0.0001 Ohms brushed fwd mode, 0.0003 Ohms brushless mode, 0.0003 Ohms brushed fwd/rev mode
Input Voltage: 4-9 Cells, 3S Lipo
BEC: 6.0V/3.0A
Motor Limit Brushless Mode: 5 Turn, 36mm can
Motor Limit Brushed Fwd Only Mode: None
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .45" (33 x 25.4 x 11.5mm)
Weight: 2.0oz with included 12G wiring
Controls: Forward/Brake/Reverse
ON Resistance: 0.0001 Ohms brushed fwd mode, 0.0003 Ohms brushless mode, 0.0003 Ohms brushed fwd/rev mode
Input Voltage: 4-9 Cells, 3S Lipo
BEC: 6.0V/3.0A
Motor Limit Brushless Mode: 5 Turn, 36mm can
Motor Limit Brushed Fwd Only Mode: None
Motor Limit Brushed Fwd/Rev Mode: 12 Turn
Throttle Profiles: 7 choices (on board)
Brushed Modes: Fwd Only, Fwd/Rev, Rev Delay
Brushless Modes: Fwd Only, Fwd/Rev, Rev Delay
Dimensions: 1.3 x 1.00" x .45" (33 x 25.4 x 11.5mm)
Weight: 2.0oz with included 12G wiring
Tech Fanatic
iTrader: (18)
Tech Fanatic
iTrader: (37)
It has been talked about several times in these forums by teem drivers.