Associated RC12R5
#2057
Hello, I'm from Spain and I'm waiting a 12r5.1 from a partner of this forum... I never ran 1 cell and I don't have any idea about ratios for this circuit:
My electric setup is:
Hobbywing Xerun 120A 2.0
Fantom Ion 10.5
SMC 40C 3.7v
Novak Booster
Is a good choice? What ratio (not rollout for the moment) you think is a good start for that circuit?
I heard that Xerun 2.0 works good with 1 cell... Anyone can tell me the ESC Setup recommended? I have also an LRP SPX StockSpec... Which is better por 1/12th?
You think all this is a good setup for start running?
Thanks
+ YouTube Video | |
My electric setup is:
Hobbywing Xerun 120A 2.0
Fantom Ion 10.5
SMC 40C 3.7v
Novak Booster
Is a good choice? What ratio (not rollout for the moment) you think is a good start for that circuit?
I heard that Xerun 2.0 works good with 1 cell... Anyone can tell me the ESC Setup recommended? I have also an LRP SPX StockSpec... Which is better por 1/12th?
You think all this is a good setup for start running?
Thanks
#2058
Used a similar ESC (Venom Pro ESC V2) with 10.5t on 1s and works very nice.
I did however run a 7.4v w/ regulator for the receiver pack.
software 107 (downloaded from SP website)
no lipo cutoff
punch max
timing max
forgot the rollout but just gear with motor temps.
I did however run a 7.4v w/ regulator for the receiver pack.
software 107 (downloaded from SP website)
no lipo cutoff
punch max
timing max
forgot the rollout but just gear with motor temps.
#2060
Thanks for the help... What do you think about our carpet track?
#2063
#2066
Chassis Brace
Anyone looking for a chassis brace? I am a local machinist here in Indy and I have made 8 braces for anyone who is interested. I will sell them for $22 shipped within the United States. They are similar to the product that Yokohama makes, but with much closer tolerances. Unfortunately I am unable to anodize them. Feel free to PM me to exchange info. Thanks Steve
#2067
how is that brace better than stock?
#2068
Tech Fanatic
iTrader: (5)
Anyone looking for a chassis brace? I am a local machinist here in Indy and I have made 8 braces for anyone who is interested. I will sell them for $22 shipped within the United States. They are similar to the product that Yokohama makes, but with much closer tolerances. Unfortunately I am unable to anodize them. Feel free to PM me to exchange info. Thanks Steve
http://www.rctech.net/forum/electric...c12r5-130.html
#2069
Tech Elite
iTrader: (49)
Anyone looking for a chassis brace? I am a local machinist here in Indy and I have made 8 braces for anyone who is interested. I will sell them for $22 shipped within the United States. They are similar to the product that Yokohama makes, but with much closer tolerances. Unfortunately I am unable to anodize them. Feel free to PM me to exchange info. Thanks Steve
#2070
Tech Elite
iTrader: (15)
Wow Steve, I actually thought the Steve I sent them to in Indiana was using them for his car, not trying to make a buck, pretty sad, heres the link that started this...... #1947
http://www.rctech.net/forum/electric...c12r5-130.html
http://www.rctech.net/forum/electric...c12r5-130.html