The FS internal ratio is 1.8 i think and the RS is 2.059

Of course....the internal pulleys/diff pulleys are 17 vs 18 and 34 vs 35T.

hi Luis

What store in europe or overseas I can find pieces to E4RS (E4RS top deck and RS motor mount)?

THANK
OLIVIER

http://demonpowerproducts.co.uk/index.php?cPath=94_117

Not sure if they have what you are looking for but he carries most things.

hi thank
no parts for e4rs in stock

In Rcshopping or Wolfhobbies, is possible, but is you like i talk with Spanish distributor tomorrow, because the friday he said me, the next week arrived more parts. Maybe it is better to buy a whole car, because you have all parts, new parts and spares.

In other hand, yesterday and today, i make more hours of testing, some work and others no, for me.
In first, the rear hubs (kfactory 1.5º), are a option to have, the car is more planted with 3º rear.
Now the anti-squat rear, work best, the car is more easy when brake, and have very good aceleration.
In front, the same, the car is good enter to the turns, have more steering, but with the rear most caught.
Definitely, for me, work best the HB stabilizers, front and rear, i feel the car more roll, is more round into the turn.
I use, HB springs, too, but this is more personal, the Lbs are the important thing.
There is one thing, which was not explained, in the front rear pivot block, the ball conector support seems to work slighty better, pointing up rather than put a 1 mm washer below ¿...? .
Finally, i test the Marcos, 2º setup, and the word is "smooth" , but for me, the lap times are slowest, is possible my skills are not than good, i haved to change some things.
In front, i put a 1.4 stabilizer, and 1mm F - 1.5mm R, below pivot blocks.
In rear, ball conectors up and 0.5 below, and 1mm rear.
With this changes, for me, are 0.3 - 0.5s, faster lap, but i use Sorex 36, because is the control tyre, for races here, and i need to adjust the car to this tyre.
Well, with this setup i put the rear hubs 1.5º + 1.5º in pivot block, (3º in total), and put 2 mm below upper link, front and rear, and the car are more fast, the grip in the track are slighty best, too.

Is normal, one setup is not possible to work perfect all people, the driver, the track, the grip, ...are more factors, but this setup work good, and helped me, thank you very much.
I hope, help to others TM drivers.

Here a photos, with 5300 Nosram Lipo, and HB stabilizers fit front and rear.

Greetings Luis C.

MP luis
you have a spool jasmin product? its nice;)
you have a front Turnbuckles AE?

looks good!!!

Mp reply, thanks Marcos. The turnbuckles are HPI titanium, i have from Cyclone car, is not special, is because i have a tool for this turnbuckles, and is more easy to adjuts the camber.

Greetings, Luis C.

How do you adjust the lower roll centre settings? ie; kick up/anti dive - anti squat/ pro squat settings.

Also how is the rear toe angle changed?

Cheers
Aaron

Shims under the alloy suspension blocks adjust the roll centres and the toe-in is adjusted by turning the plastic holders in the alloy suspension blocks.

Arrows facing out = 2.5 degrees, Arrows facing in = 1.5 degrees.

Hey guys just a quick question. I've been following this car for awhile now. I just have a couple of questions.

what the difference in all the different models. I think the RS is the top model for aphalt racing.

my next question does the Rs, comes with a spool or a one way or??

just curious know that you guy's been running the car for awhile. how does it stand up to breakage.

and If one should go to the car. what would be the import spares to carry on hand.

I was thinking on going lipo but don't want to butcher my 415 mre.

I race mainly stock and 19. 90% on Asphalt. on a small to medium track with sugar water layed down.

Thanks for any info.

I purchased a E4 FS-C1 edition from Wolf Hobbies. It's a foam spec modified to run on asphalt and has the convertable oneway to make the spool. Have not tried it yet, waiting for the snow to melf here in Montreal. Will be running 10.5/19T class with a SMC4000 lipo that fits great.

My lightweight E4!!!

My ESC(MK03) is 20g more heavier than LRP TC.

My LRP TC ESC is die!! :cry:

1330gr ouawwwwww

my e4 is 1450gr :confused: