man that sucks

i wish i didnt take the deal with top to run for them and still had my e4rs

Sold my Top also.
Was fun to drive but a bit fragile.
Only thing i broke the last couple of races on my tTM where the "old" type front axles.
That was due to being hit by some one and then end up in the boarding or me making a mistake and gone flying:D:D.
Now with the new type i haven't got any trouble any more and the front is even more free then before.
With my Sakura i only broke one right steering hub and that was with very low temps.

regards Roy

Don't know if it's still available but try this:

http://www.rctech.net/forum/r-c-item...-car-sale.html

Wish I could help but all 3 of mine are E4FS. I'm about to get a 4th with a bunch of parts and a couple of partial cars. I can keep in touch if you're interested. maybe I can put together and sell a complete chassis.

ya i really want a e4rs if i dont get one used i guess ill give up and buy new :(

No problem. Did you send him an e-mail also ?? I would. Lots of rc tech guys don't check in very often. Good Luck !!

just waiting to hear back

i have two FS optimized for rubber with a lot of goodies ..pm email addy and ill send u picks if your intrested ...

Hey Folks, I'm in need of a Tamiya chassis as our club is getting involved with TCS. I'd like to sell or trade one of my 3 E4FS cars. If you're interested in a clean E4FS to buy or have a Tamiya TA05 you'd like to trade, please PM me. Thanks, Dino

hey guys i want to trade my photon for a team magic e4rs if you know anyone that want to trade let me know please
it has lots of upgrades on it

trade roller for roller

http://i23.photobucket.com/albums/b4...10507-0143.jpg
http://i23.photobucket.com/albums/b4...10507-0144.jpg

I got a E4RS With Lots of Spare Parts for Sale
Send some my way if any one wants to buy.
Getting out of TC for a while and need to pay bills for some other stuff.

Its been raced needs some Cleaning up, Change Shock Oil and regular maintainance. But its 100% running and working.
Also have replacement front and Rear belt, 2 Extra Side Belts.
Full set of arms, 3 sets of Rear Hubs, Multiple Fronts C hubs and KNuckles.
Lots of misc internal parts. Basically enough to get you through many race days with braking parts. Since i have most comon replacements parts in here.

Servo and spur will be removed.

Will sell servo also its a S9551 Futaba

Probably make a FS thread in a few.

http://i546.photobucket.com/albums/h...e/DSC05152.jpg

Anybody heard any new news on the updated chassis release ?? I swear every time I drive this car and work on it I fall in love all over again. This car is just THAT good !!!! I will say one thing....WOW what a difference the alloy front knuckles and rear hubs make. All that slop with the plastic parts is gone. I installed the Wolf Hobbies parts front and rear. SOOOOOOO much nicer.
Maybe I've just missed it but can anyone tell me if there is a better replacement piece for the drivers side rear chassis brace ?? You know the one that everyone dremels to get motor clearance. I just found that on one of my cars, the drivers rear upper deck screw can't tighten because the brace was dremeled a bit too much. Rather not go through the hassle if an already modified piece is available.

You can get the metal piece. the shaped it a bit different.

You talking about the Stand up piece connected to the Belt tensioner on the side ?

Or run a motor that isnt over sized on the rear.
Novak Ballistic
LRP X12 (Alot of torque for this chassis on tight tracks)
Team Powers with 12.5mm Rotor (Found this to be the perfect balance)

And they all fit convertibly into the rear Pod with out any dermeling.

Use the alloy part or better yet use the K factory lipo conversion.
It spaces the top deck a bit and gives you more clearance for the motor due to the shape of the side belt tensioner bracket.
You van also use the LRP X12 motors.
Depending on the rotor you use, you get a lot of rpms or a lot of torque.
I use the stock rotor in the LRP X12 13.5 and it is faster then a speedpassion and has more torque also.
I found only the Tekin motor reving higher.
Didn't try the new GM motor tho
That one has 3100RPM/V and 395Watts of power and is short enough to get in there.

regards Roy

Does anyone know where to get that rear shock tower spacer? Does yodog sell them? I'd really like to try one out...

Hummm You mean the uprights or a spacer plate ?to move the shock towers back ?