|
Also
53301 TL01 suspension shaft set - SS might worth to be considered |
Originally Posted by danjoy25
Guys,
Just a couple of ???? to mini pros. 1) Does the 60D Type A come with inserts or do I need to get 50686 60D Inner Sponge Tire Set (Soft) as well? 2) What is the difference between TA03 diff set and Manta Ray diff set? Which one should I get. 3) Is the new M03m chassis basically the same but with a shorter extension piece to M03L? Just want to know if I get the chassis extension then I could run the BMW Cooper body. 4) Any useless stuff in the list below or did I miss anything that I need. 58368 Suzuki Swift Super 1600 - M03M 51237 Suzuki Swift Super 1600 Wheel Set 53267 TA03 Ball Differential Set 53343 M03 Front/Rear Stabilizer 53344 M03 Aluminum Heat Sink 53345 Toe-in Rear Upright 53346 Ouick Release Batt Holder 53390 Hollw Carbon Gear Shaft 53523 Alum Front Upright Set 53527 3 x 32 Titan Turnbuckle 53569 Clamp Type Alum Wheel Hub - 6mm 49198 TRF Damper Set 53488 Adjustable Ball Connectors x 2 53333 Touring Car Tuned Spring Set (Short) 53205 M-Chassis Universal Shaft Set 53340 M Chassis 60D Reinforced Tires Type A x 4 50686 60D Inner Sponge Tire Set (Soft) x 2 53379 Light Weight Diff Balls Does anyone know where to get a Honda Civic Type R EK hatchback body that can fit the M03 chassis? :nod: :nod: :nod: Thanks in advance. 1. get the hard inserts. 2. get the ta03 diff. its smaller 3. run BMW for long chassis 4. I would get. Toe in (for tuning), Quick release battery holder (makes changing batteries much easier - no need for body clips), Spring set (tuning), Turnbuckle (tuning more easier), Hollow carbon fibre shafts (faster) Also essential (if you want to go fast) is ball bearings if you dont already have |
How are you guys lowering the car down to 4mm-5mm....?
|
Originally Posted by lbckevin
How are you guys lowering the car down to 4mm-5mm....?
|
Originally Posted by danjoy25
Guys,
Just a couple of ???? to mini pros. 1) Does the 60D Type A come with inserts or do I need to get 50686 60D Inner Sponge Tire Set (Soft) as well? 2) What is the difference between TA03 diff set and Manta Ray diff set? Which one should I get. 3) Is the new M03m chassis basically the same but with a shorter extension piece to M03L? Just want to know if I get the chassis extension then I could run the BMW Cooper body. 4) Any useless stuff in the list below or did I miss anything that I need. 58368 Suzuki Swift Super 1600 - M03M 51237 Suzuki Swift Super 1600 Wheel Set 53267 TA03 Ball Differential Set 53343 M03 Front/Rear Stabilizer 53344 M03 Aluminum Heat Sink 53345 Toe-in Rear Upright 53346 Ouick Release Batt Holder 53390 Hollw Carbon Gear Shaft 53523 Alum Front Upright Set 53527 3 x 32 Titan Turnbuckle 53569 Clamp Type Alum Wheel Hub - 6mm 49198 TRF Damper Set 53488 Adjustable Ball Connectors x 2 53333 Touring Car Tuned Spring Set (Short) 53205 M-Chassis Universal Shaft Set 53340 M Chassis 60D Reinforced Tires Type A x 4 50686 60D Inner Sponge Tire Set (Soft) x 2 53379 Light Weight Diff Balls Does anyone know where to get a Honda Civic Type R EK hatchback body that can fit the M03 chassis? :nod: :nod: :nod: Thanks in advance. Call HPI I think they still make them |
Originally Posted by danjoy25
Guys,
Just a couple of ???? to mini pros. 1) Does the 60D Type A come with inserts or do I need to get 50686 60D Inner Sponge Tire Set (Soft) as well? 2) What is the difference between TA03 diff set and Manta Ray diff set? Which one should I get. 3) Is the new M03m chassis basically the same but with a shorter extension piece to M03L? Just want to know if I get the chassis extension then I could run the BMW Cooper body. 4) Any useless stuff in the list below or did I miss anything that I need. 58368 Suzuki Swift Super 1600 - M03M 51237 Suzuki Swift Super 1600 Wheel Set 53267 TA03 Ball Differential Set 53343 M03 Front/Rear Stabilizer 53344 M03 Aluminum Heat Sink 53345 Toe-in Rear Upright 53346 Ouick Release Batt Holder 53390 Hollw Carbon Gear Shaft 53523 Alum Front Upright Set 53527 3 x 32 Titan Turnbuckle 53569 Clamp Type Alum Wheel Hub - 6mm 49198 TRF Damper Set 53488 Adjustable Ball Connectors x 2 53333 Touring Car Tuned Spring Set (Short) 53205 M-Chassis Universal Shaft Set 53340 M Chassis 60D Reinforced Tires Type A x 4 50686 60D Inner Sponge Tire Set (Soft) x 2 53379 Light Weight Diff Balls Does anyone know where to get a Honda Civic Type R EK hatchback body that can fit the M03 chassis? :nod: :nod: :nod: Thanks in advance. |
Guys, Just a couple of ???? to mini pros. 1) Does the 60D Type A come with inserts or do I need to get 50686 60D Inner Sponge Tire Set (Soft) as well? 2) What is the difference between TA03 diff set and Manta Ray diff set? Which one should I get. 3) Is the new M03m chassis basically the same but with a shorter extension piece to M03L? Just want to know if I get the chassis extension then I could run the BMW Cooper body. 4) Any useless stuff in the list below or did I miss anything that I need. 58368 Suzuki Swift Super 1600 - M03M 51237 Suzuki Swift Super 1600 Wheel Set 53267 TA03 Ball Differential Set 53343 M03 Front/Rear Stabilizer 53344 M03 Aluminum Heat Sink 53345 Toe-in Rear Upright 53346 Ouick Release Batt Holder 53390 Hollw Carbon Gear Shaft 53523 Alum Front Upright Set 53527 3 x 32 Titan Turnbuckle 53569 Clamp Type Alum Wheel Hub - 6mm 49198 TRF Damper Set 53488 Adjustable Ball Connectors x 2 53333 Touring Car Tuned Spring Set (Short) 53205 M-Chassis Universal Shaft Set 53340 M Chassis 60D Reinforced Tires Type A x 4 50686 60D Inner Sponge Tire Set (Soft) x 2 53379 Light Weight Diff Balls Does anyone know where to get a Honda Civic Type R EK hatchback body that can fit the M03 chassis? Thanks in advance. |
Originally Posted by lbckevin
How are you guys lowering the car down to 4mm-5mm....?
|
Upper arms
Hi, I too love racing these M-cars. I'm building another now and was wondering if the 53303 TL01 adustable arms will work on the M03. Has anybody tried this? If they work the car should still be TCS legal.
Also, does anybody know when the Suzuki Swift Super 1600 - M03M will be released? I would like to get the chassis extender so I can use an HPI 225mm body. |
I had seen a date of March 30th and also April. If you check the Tamiya USA website, they list the part number for the new suspension pieces including the body extender. Does anyone know the dimensions of the "1050" bearing that are used in the new suspension pieces?
|
Anyone one have a carpet setup for a m04m ? any tips on this car are very welcomed.
|
Anyone had tried fixed axle in mini cooper ?
I want to completely eliminate the spin issue. |
1050's are 5mmx10mm, likely 4mm thickness..
|
fixed axle
You could squirt shoe-goo in a stock diff. That should lock it up. If you try it tell us how it goes.
|
Originally Posted by ckbridge
You could squirt shoe-goo in a stock diff. That should lock it up. If you try it tell us how it goes.
Turning became an issue with a tight track and I felt it did not help me at all. The front wheels have 2 functions on the m03, the rear one.... Front: Wheel drive and steering Rear: tracking only On a tight track a well built ball diff is the only way to go..... |
| All times are GMT -7. It is currently 01:02 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.