I just gotmy Swift M03M. Pretty cool looking body. I hope to get started in it tonight!

Ey sup, didn't know you were there. Yeah it was great. Over 45 racers joined. But I didn't run the last heats I couldn't see the car anymore its a bit dark at JP track at night. With all the bumping and crashing going on I pulled out. Didn't even join the 23 turn touring coz during the practice runs in the morning my TAO5 got mauled by other cars. :lol:
How was your finish? Were you in the top A group?

Here's a pic of the indoor nitro track the Futaba Cup 2006 was held.
You got any other pic sup? :D
http://www.rctech.net/forum/attachme...hmentid=186451

since you have been offically sucked in to the Suzuki mini madness Adrian... (will you be making a TCS trip to TA?)

Thats a tough one. I was thinking about doing the Reedy Race this year. I dont get to travel very much as when ever there is a big race all the fast people in the office get to go but the boss has to stay...lol!

I hear the TCS regional at Tamiya America this year may be a 2 day event due to the number of entries last year (200+ I think)

come to the left coast...big party! :nod:

Well TCS is not a big race for your team, So come out and try the Tamiya track.

If you guys need shims to tighten up the suspension on your Mini's Take Off makes a 4mm i.d. titanium shim kit. They are great for getting the slop out of the upper camber links. I used motor shims fo my lower suspension arms.

You get:

10 - 0.1mm shims
10 - 0.2mm shims
10 - 0.3mm shims

TT303 for $5.99

http://takeoff.main.jp/TakeOff-Eng/Item/TT-303.jpg

They also make Magnesium clamping Wheel hexes that fit the Mini.

TM002 4pk for $29.99

http://takeoff.main.jp/TakeOff-Eng/Item/TM-002A.jpg

how thick are the hexes?

Thanks for the heads-up on the Take-Off parts Adrian. I'll have to order a shim kit for sure.

Steve

servo mounts
 

does anyone know if the servo mounts from the m01 will fit the m03


im going nuts trying to find servo mounts

also if anyone has an extra set of servo mounts please let me know

thanks

M01/02 mounts are 21mm long, M03 are 23. Not a lot in it and I think they'd certainly go close enough to work.

Cant imagine why they'd be so hard to find? There are at about 4 sets rattling around in my pitbox now!

.
 

thanks for the info on the mounts

go figure they wont fit

They're on the 'C' parts tree (50793), couldnt cost more than 10 bucks - if that to buy..

There will be alot less entries this year, Tamiya booted 2 of the East Coast races.....