|
Originally Posted by Granpa
(Post 13342316)
What he was referring to was that were not seeing as many new Mini racers showing up. I suspect he believes it's due to the new rules. Of course, some started racing Mini because of switch to B/L motors. I suspect tho, that these are not the new racers that he was referring to.
|
Originally Posted by monkeyracing
(Post 13341898)
Depends where you buy, doesn't it? My V2 was $118. My Gold edition was $132. Shipped, each was under $150. I've seen full, all plastic kits online for around the same prices.
They supply you with a body, sure, but the kit tires are useless and the brushed motor/ESC are equally useless, due to races running brushless. So, you've got an all plastic car, with a body, but no tires, shocks, bearings or upgraded parts that are useful for club racing. Tell me where the advantage of the regular kit is, outside of new racers entering the hobby. My apologies if this comes across as harsh, but the reality is that the special editions make economic sense. |
Originally Posted by sad_rocc
(Post 13342802)
Wow, lucky you! Prices around me are not even remotely close, unless I want to order from Japan but then I make up for the low price in shipping costs. Best I could find stateside was about $165 for the all plastic m05, a bearing kit and mini cva shocks. Seems like the minis are a lot more popular in Australia and Japan than they are in the US, which probably makes a big difference in pricing.
|
Ok, any recommendations? RCMart.com seems to have everything, but not those kind of prices and shipping on a kit was $45. Those prices are lower than my LHS can get wholesale!
|
Originally Posted by Aitutaki
(Post 13342465)
thanks eric, so than i have to sandpaper the ends. it really does not move as it should. strange.
Change the ballstuds with lower profile studs like those used on the older TRF cars (hex head). They are 1 mm lower, so they'll improve the angle. I am not sure, but if Tamiya makes a carbon shock support you might want to give that a try (that might work with the current ballstuds). |
Originally Posted by sad_rocc
(Post 13342962)
Ok, any recommendations? RCMart.com seems to have everything, but not those kind of prices and shipping on a kit was $45. Those prices are lower than my LHS can get wholesale!
|
Originally Posted by Aitutaki
(Post 13342364)
hy guys,
i am heaving an issue building my V2... at step 17 -19 building the SWB Model , the rear upper mounts for the uprights do not move as they should when attached. the arms hardly can move if attached. as long as i think tamiya would have known this before releasing, i guess i made some mistakes ;) but which ? as you can see on the photo, the angle after attaching is to much.. thanks for your help... |
Originally Posted by sad_rocc
(Post 13342962)
Ok, any recommendations? RCMart.com seems to have everything, but not those kind of prices and shipping on a kit was $45. Those prices are lower than my LHS can get wholesale!
BTW: I apologize to all the local hobby shops that can't match this pricing. It's not entirely your fault. The thing you have to understand is that I'm a disabled guy on a fixed pension. I can't keep up with local pricing. With S Grips being the mushy things they are now, I can easily burn through a set every week. At about $20/pr (mounted) plus race fees, gas and everything else that goes along with this hobby...well, if it weren't for cheap new stuff and even cheaper used stuff, I couldn't participate. |
I don't think anyone needs to apologise. That's what credit cards are for: to vote for competition. Local shops will either adapt or perish. In the great land of Oz where I reside, shops have demonstrated they can adapt and some did so very well, with really competitive prices. Others have bailed out. At a statistical population level it is clear the consumer is still king and shops that don't acknowledge this, pay the price (pun may or may not be intended).
|
Banzai does have very low prices and shipping is inexpensive. For parts inside the SAL shipping option, takes a couple of weeks to the states but you end up paying $3-$6 for shipping and prices are a fraction of towerhobbies.
Kits you don't have the option of going SAL, so you have to use EMS ($35-$40).. Banzais prices though are usually cheaper than RCMart, since they are in Japan / country of oring |
Originally Posted by niznai
(Post 13342131)
Don't waste your time and money with useless crap. Buy the Tamiya shocks if you want a good shock. The CVA minis would be a better choice than yours, but you can go the whole hog and get the TRF. One good thing is they'll be with you forever. Use the money you're going to save if you go to your local track before wasting money on tires and get some local advice.
|
I like ordering from TQRC also. Ships fast and carries a lot of the cool stuff that most other shops don't carry. Sean is a standup guy.
I do support my LHS, but there are things they can't get that TQ can. But thats what happens when you mostly run F1 and mini... |
I was going to order some stuff from TQRC, but they want to charge me tax and shipping which made the prices the same as my LHS. The only place locally that carries mini parts is a track that races them and because they order so little, their prices are usually over retail. $17 from Banzai for 4 mounted tires is a great deal, will definitely keep them in mind.
|
Originally Posted by Dan
(Post 13343648)
I like ordering from TQRC also. Ships fast and carries a lot of the cool stuff that most other shops don't carry. Sean is a standup guy.
I do support my LHS, but there are things they can't get that TQ can. But thats what happens when you mostly run F1 and mini... I will never have that problem with TQ. They are the best I ever dealt with. I get my orders shipped and received very quick. |
Originally Posted by sad_rocc
(Post 13342802)
Wow, lucky you! Prices around me are not even remotely close, unless I want to order from Japan but then I make up for the low price in shipping costs. Best I could find stateside was about $165 for the all plastic m05, a bearing kit and mini cva shocks. Seems like the minis are a lot more popular in Australia and Japan than they are in the US, which probably makes a big difference in pricing.
|
| All times are GMT -7. It is currently 04:44 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.