Hpi Pro 4
Tech Master
iTrader: (21)
Thanks for the Pic and the info Octavio.
Very helpful
Very helpful
Tech Master
iTrader: (80)
Setup for stock carpet
I am starting my stock carpet season with my Pro4 and need some setup help. I will be racing on 1 year old CRC Ozite 2 with great bite. Will also be running foam tires and the BMI Pro4 chassis and upperdeck. Any setups would be great that others have ran with success. Thank you.
Chirag Patel
Chirag Patel
Tech Champion
iTrader: (17)
So....does TC3 bevel gears and Diff ring gears are direct bolt-in onto the PRO 4...? I have heard ppl saying that, but have not seen ppl saying that is true or not...I know their tooth counts are the same 16/39....Thanks........
Tech Champion
iTrader: (9)
Originally Posted by Rookie Solara
So....does TC3 bevel gears and Diff ring gears are direct bolt-in onto the PRO 4...? I have heard ppl saying that, but have not seen ppl saying that is true or not...I know their tooth counts are the same 16/39....Thanks........
Tech Champion
iTrader: (17)
Originally Posted by rc-zombies
I have some TC3 gears...they are the same size and teeth count and look like the Version 1 gears. I 've had no problems with the V1.1 gears breaking...so have not put on the TC3 gears.
Tech Elite
iTrader: (11)
what do you gain/loose when you add anti-squat? mine has always been zero, it i change it to 1.5 how will the car feel?
Tech Champion
iTrader: (9)
read page 31 of the manual explaining anti-squat.
basiclly adding anti-squat to the rear will increase rear traction and slighly reduce steering. 0deg. will reduce traction and increase steering.
basiclly adding anti-squat to the rear will increase rear traction and slighly reduce steering. 0deg. will reduce traction and increase steering.
Tech Master
iTrader: (21)
What's the most anti-squat you can run? Any other ways to increse rear traction? I run 3mm on the upper camber links frt and rear. Anyway to change that and help with the rear traction? Front end is perfect rear always seems to be loose. Thanks for any help
Tech Champion
iTrader: (9)
Originally Posted by SOuthernFRIED
What's the most anti-squat you can run? Any other ways to increse rear traction? I run 3mm on the upper camber links frt and rear. Anyway to change that and help with the rear traction? Front end is perfect rear always seems to be loose. Thanks for any help
to increase rear traction...several things..
no sway bars.
lighter shock oil..
move the shocks inward
softer springs
more droop.
don't do all the changes at once... 1 at a time!
Originally Posted by Rookie Solara
So....does TC3 bevel gears and Diff ring gears are direct bolt-in onto the PRO 4...? I have heard ppl saying that, but have not seen ppl saying that is true or not...I know their tooth counts are the same 16/39....Thanks........
Also make sure your rear uper links are on the outside outer-most position (outside hole on the rear upright)... more rear traction
I personally never use this though because the car may have too much rear traction and it makes the rear end roll too much
I personally never use this though because the car may have too much rear traction and it makes the rear end roll too much
Tech Champion
iTrader: (9)
hey Marc..
you going to make the Aug.21 RcCar race? hope to make that one..since wifey is out of town...
you going to make the Aug.21 RcCar race? hope to make that one..since wifey is out of town...
Tech Master
iTrader: (21)
Thanks Zombie.That verify's everything I've done.Good to know I'm on the right track.We just run on very low grip parking lots.Traction is never plentiful so it's nice to hear all the options.
Just curious- but when you guys change your set-up, do you try to keep things neutrally biased, and change muliple things in small amounts, or just one thing to the extreme...?
-Josh
-Josh
Tech Master
iTrader: (21)
One thing at a time, a small amount. Then drive. Sometimes one change will affect another part of the car.Which requires an additional change.If you change more than one thing at a time you really have no idea what helped and what hurt.