timmig

iTrader: (25)

Still searching for the 103 tires and compounds I need. Thanks Cuda for the info!! Found some 38 degree fronts and 30 degree rears in Hong Kong. Ordered a couple of sets to try. Going for the older 53128's for the front-- found some 53129's.
FYI
Tim

timmig

iTrader: (25)

Allrighty then---found some wheels and tires at Gyro-- AND two packs of the Orion 4500mah lipos to run with!! These should get me enough run time to practice and qualify in that their running short qualifying sessions. I'm going to try and make the race this weekend--- just gotta hope one of my radios shows up!! AND I get time for working on this thing to clean it up and have it ready to run!!
Hope to CYA out there.
Tim

lightfoot

iTrader: (2)

This Saturday practice and Sunday Racing at the Tamiya track Southern California... Ultimate F1 Series Day Race... Two classes... foam silver can Mabuchi 540 J motor ONLY, no RPM limit.... and rubber tire, 17.5 brushless ONLY...

Three Rounds of racing...

Each round will be a 2 min qualifying period, 5 cars max on the track, your looking for one fist lap to determine your grid order... 8 min race...

We will do this three times... points given to the top 8 finishers... the winner will be determined by points at the end of the day...

For more rules and or info go to:

http://www.charleslightfoot.com/UF1SD.html

JATOdriver

iTrader: (23)

I just recently bought my first F103 RM from a fellow mamber, and was wondering what LiPo's fit this chassis? Do the ROAR aproved hard casees fit?

robk

iTrader: (22)

If you run the o ring suspension, almost anything will fit. With the pivot ball, the rounded ones like an orion 3800 fit better

414MPH

iTrader: (8)

There are some high capacity lipos that fit with the pivot ball rear suspension. The Orion 4800's fit and I borrowed a 5000 at the TCS Finals that fit also, but I don't remeber the name on it, but it looked like the same case as the Orions..

fvrr

iTrader: (22)

Any youtube links on the race? OR race pictures?

ChadRacing

iTrader: (3)

what rollout is everying running on their F103's with foams and using a 540 silver can motor? I have a F109 coming from 3 racing and need to know how to gear it. But i am using 64 pitch gears

lightfoot

iTrader: (2)

check vid out....

http://www.youtube.com/watch?v=MpI9rjnY4HU

pics links

http://www.charleslightfoot.com/UF1SD1.html

http://www.charleslightfoot.com/UF1SD2.html

fvrr

iTrader: (22)

Sweet, thanks..

F N CUDA

iTrader: (34)

New video of the Sportsman round 2

Watch me blow a second place start after only 1 lap!

I came back tho and finished 3rd, again.

Thanks Anthony for posting the video.

Now, anyone have the first round? I actually got to lead a couple laps in that one.

http://www.youtube.com/watch?v=P44w7XZlSHo

akura2

New bodies from Protoform!!


http://www.rctech.net/forum/6421201-post660.html

ChadRacing

iTrader: (3)

wow cant believe protoform came out with bodies...the high nose looks great

sidecarphil1

iTrader: (1)

i have bought a F103 GT

but i want bo use it as an F1 car

what do i need to change ???

can you get Lipos in them ??

414MPH

iTrader: (8)

Chassis plate
Front steer knuckles (aka front spindles)
remove spacers from the link type front end
new king pins
wheels / tires
rear diff parts including right and left side haxle hubs
body set with wings and mounts