Xray T2'008
#1441
Thanks guys for all the replies about the springs. My next concern is i will be running lipo's. i realy don't want to put the weight directly to the batteries as i wish to use them in diffrent vehicles. does anyone make like a tray with weight on it? If not what is everyone doing? pics would be a great help.I'm trying to get ready for when the car gets here.next is what batteries will fit in the car? I will be getting the 008 6cell eu what is the measurment from the top of the chassis to the bottom of the top plate? I'm trying to keep the cost of going to lipo's down. I don't want to buy something and then it not fit properly. Thanks in advance,Neil
#1442
I have just purchased an T2 008 Xray 6 cell EU model and I need some help sourcing pinions and spurs in Australia. I am more than happy to buy them off the net. Any suggestions on sites? I have bought quite a few spares off of amainhobbies but they dont have the gears I need. I am running 540pro and need the following gears:
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
#1443
I have just purchased an T2 008 Xray 6 cell EU model and I need some help sourcing pinions and spurs in Australia. I am more than happy to buy them off the net. Any suggestions on sites? I have bought quite a few spares off of amainhobbies but they dont have the gears I need. I am running 540pro and need the following gears:
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
I think amp draw will have what your looking for Shane who runs this site also does online sales I belive the site is www.ampdraw.com or just look for there ad on here if not you can contact RC America at www.rcamerica.com and they can assist you...Hope that helps Later Drew.....
#1448
If you don't like shopping there don't shop there....There are plenty of places to shop online I just suggested that because I know that Shane stocks all of Xray product and ships anywhere and it looked like Niskie was looking for Xray spurs and pinons those are Xray part numbers..Later Drew
#1449
Tech Elite
iTrader: (13)
Uh.... I just typed "64 pitch" in the search box and all the 64 pitch spurs and pinions were shown... I then put in "XRay" in the manufacturers box and only the XRay 64 pitch gears showed up... then I added "spur" and just the 64p spurs showed up.... not rocket science Looks like it does exactly what your asking if you use it right
#1450
nexusracing.com
#1451
Tech Apprentice
Do any one have problems breaking the bearings in the left rear hub.
(Most of our tracks in UK ar clockwise).
Bearings are regulary cleaned and oiled but still wear out/break about
ever 2 to 3 months.
Is any one running a spacer between bearings like over manufacturers.
Also does any one now of a good cheap suppler of the 5x10x4 rubber sealed
bearings. In UK they cost $11.00 USD for two bearings.
Chris
(Most of our tracks in UK ar clockwise).
Bearings are regulary cleaned and oiled but still wear out/break about
ever 2 to 3 months.
Is any one running a spacer between bearings like over manufacturers.
Also does any one now of a good cheap suppler of the 5x10x4 rubber sealed
bearings. In UK they cost $11.00 USD for two bearings.
Chris
#1452
I have just purchased an T2 008 Xray 6 cell EU model and I need some help sourcing pinions and spurs in Australia. I am more than happy to buy them off the net. Any suggestions on sites? I have bought quite a few spares off of amainhobbies but they dont have the gears I need. I am running 540pro and need the following gears:
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
305732 32t/48 pinion
305733 33T/48 pinion
305778 Spur Gear 78T/48
Any help would be appreciated. The only place I have found so far is the xray shop but they dont appear to ship to Australia.
Thanks
Give the distributor in Australia a call. Call Custom Model Cars on 02 9579 4007 and ask for Matt. He will point you in the right direction.
#1453
Do any one have problems breaking the bearings in the left rear hub.
(Most of our tracks in UK ar clockwise).
Bearings are regulary cleaned and oiled but still wear out/break about
ever 2 to 3 months.
Is any one running a spacer between bearings like over manufacturers.
Also does any one now of a good cheap suppler of the 5x10x4 rubber sealed
bearings. In UK they cost $11.00 USD for two bearings.
Chris
(Most of our tracks in UK ar clockwise).
Bearings are regulary cleaned and oiled but still wear out/break about
ever 2 to 3 months.
Is any one running a spacer between bearings like over manufacturers.
Also does any one now of a good cheap suppler of the 5x10x4 rubber sealed
bearings. In UK they cost $11.00 USD for two bearings.
Chris
#1455
I used to run TMīs E4 car erlier, but have ordred a 008 Xray..is there anything special that i should keep in mind?
What is the most common parts that brake,is it the usually, steering knuckles,rear hubs,arms,ballends and T-buckles? how about belts?
A small lists would be real good, since im going to order all parts for the season today or tomorrow.
/Thomas
What is the most common parts that brake,is it the usually, steering knuckles,rear hubs,arms,ballends and T-buckles? how about belts?
A small lists would be real good, since im going to order all parts for the season today or tomorrow.
/Thomas