Serpent to 1/10th EP Touring Kit S400
#496
Bryan
#497
what does inboard toe on the front do if you change it like maybe change the front with the rear making the rear have 2 and the front have 3
#498
Tech Champion
iTrader: (15)
Spool is in great shape, I am getting a stretchingof the pin holes on the CVD's , so I have little slop, but it holding up pretty nice.
When I blew out my Thrust bearing, I took the balls out of a Xray thrust, and built my own bearing with the two thrust washers.
Running 5 cell, I really dont know what it weighs, all I know is it passes tech.
I have been running a 19lb HPI spring in the front as it is a little softer then the stock one. Also running Xray 30wt oil all the way around
When I blew out my Thrust bearing, I took the balls out of a Xray thrust, and built my own bearing with the two thrust washers.
Running 5 cell, I really dont know what it weighs, all I know is it passes tech.
I have been running a 19lb HPI spring in the front as it is a little softer then the stock one. Also running Xray 30wt oil all the way around
#499
Tech Initiate
Anybody having problems with the Serpent camber links coming off what seems to be way too easy????
#501
Tech Elite
iTrader: (26)
From Turnpike: exit on Atlantic Blvd and head west about 6 miles to University Dr. Make right on University, to the 2nd light, Ramblewood Blvd. Make a left on Ramblewood, and pass the MIddle School on your left hand side and turn left on the street right after the middle school(11 St?) Follow the road and the Park in on your left hand side...
Call me if you need help getting there:
Yohan
954-643-0209
#503
Tech Regular
#504
Bryan
#507
Tech Elite
iTrader: (26)
#509
Tech Fanatic
Hi Guys,
First post for me on the electric side of RCTech.
We are really excited with our new S-400. We are in the process of bringing more products to the market and this car is part of our new line up
I have not being able to get more involved with Electric so far. We are really busy at the moment with more products coming out in the next few months as well as getting ready for really important events, either attending or organizing the logistics on my side, as the IIC in Vegas, 1/8 WC in Argentina, sedan Nationals, many other races , shows, etc.
We have Billy Easton and Jeff Cupps as well as many other Team drivers in different regions that are using the cars and sharing info here. Please don't hesitate to approach them and ask for help.
Regarding parts, etc. here a few news:
Parts: Finally are going to be ready from this week. We have plenty of stock of almost everything released by the factory. We have plenty of orders to fill but enough material is coming also to service new orders. We now that also many shops where waiting for parts to make their car order or reorder. Well, it's time to do it
Springs: New springs are instock and available here is the part# and rate:
160300 Spring white 13 lb
160301 Spring yellow 16 lb
160302 Spring orange 19.5 lb
160303 Spring red 23.5 lb
160304 Spring pink 28 lb
160305 Spring blue 33 lb
160306 Spring purple 39 lb
160307 Spring green 45.5 lb
160308 Spring grey 51.5 lb
160309 Spring black 57 lb
1603010 Spring-set short (10 sets)
Kits: Kits in stock and more arriving next week
Setup: Thanks you guys for providing a setup sheet. It looks awesome. Here is finally the official one:
http://www.serpent.com/product/400001/setups/
Carpet version: Beside the rubber version already out, a carpet version is scheduled to be out really soon. A conversion set is going to be available too.
More news to come. Stay tuned on Serpent.com
Have fun at the races and enjoy the S-400
First post for me on the electric side of RCTech.
We are really excited with our new S-400. We are in the process of bringing more products to the market and this car is part of our new line up
I have not being able to get more involved with Electric so far. We are really busy at the moment with more products coming out in the next few months as well as getting ready for really important events, either attending or organizing the logistics on my side, as the IIC in Vegas, 1/8 WC in Argentina, sedan Nationals, many other races , shows, etc.
We have Billy Easton and Jeff Cupps as well as many other Team drivers in different regions that are using the cars and sharing info here. Please don't hesitate to approach them and ask for help.
Regarding parts, etc. here a few news:
Parts: Finally are going to be ready from this week. We have plenty of stock of almost everything released by the factory. We have plenty of orders to fill but enough material is coming also to service new orders. We now that also many shops where waiting for parts to make their car order or reorder. Well, it's time to do it
Springs: New springs are instock and available here is the part# and rate:
160300 Spring white 13 lb
160301 Spring yellow 16 lb
160302 Spring orange 19.5 lb
160303 Spring red 23.5 lb
160304 Spring pink 28 lb
160305 Spring blue 33 lb
160306 Spring purple 39 lb
160307 Spring green 45.5 lb
160308 Spring grey 51.5 lb
160309 Spring black 57 lb
1603010 Spring-set short (10 sets)
Kits: Kits in stock and more arriving next week
Setup: Thanks you guys for providing a setup sheet. It looks awesome. Here is finally the official one:
http://www.serpent.com/product/400001/setups/
Carpet version: Beside the rubber version already out, a carpet version is scheduled to be out really soon. A conversion set is going to be available too.
More news to come. Stay tuned on Serpent.com
Have fun at the races and enjoy the S-400
#510
Tech Fanatic
Sorry, double post!!
Last edited by Paolo M; 09-25-2007 at 09:42 AM. Reason: Double post