Team Losi JRXS Type-R
Tech Addict
iTrader: (12)
I have 2 kits on their way.
Thanks to Hyper Mike for showing me this car.
I also have the FF layshaft on the way.
I am also thinking about picking up one of the Exotek top decks, I will be running carpet with rubber tire and 17.5 non boosted.
Will the Exotek deck be the best choice or should I just go with modding the standard deck?
What is the most popular deck mod you guys are doing?
If Exotek seems to be the way to go, do you want to split shipping with me and I will order 2, Mike?
Thanks to Hyper Mike for showing me this car.
I also have the FF layshaft on the way.
I am also thinking about picking up one of the Exotek top decks, I will be running carpet with rubber tire and 17.5 non boosted.
Will the Exotek deck be the best choice or should I just go with modding the standard deck?
What is the most popular deck mod you guys are doing?
If Exotek seems to be the way to go, do you want to split shipping with me and I will order 2, Mike?
Tech Fanatic
iTrader: (18)
I would suggest trying the stock top deck before you start hacking it. You might need to put the dremel to it if you decide to put bullet plug batteries in their. I got the exotek as a back up when there was talk that some parts might be disappearing from the shelves
Tech Fanatic
iTrader: (3)
Looks like the exotek top deck is all that's available now so you might want to keep it original just incase you ever want to go back to the stock top deck. Aside from that all parts seem to be in good supply but I am stocking up regardless.
Tech Fanatic
iTrader: (8)
Tech Fanatic
iTrader: (13)
Hi,
Does it come with aluminum clamp style hex hubs? Or composites?
If not, can I use other brand's aluminum hex hubs? What will fit
without any mods, Tamiya's, Xray's or HB's?
Thanks
Does it come with aluminum clamp style hex hubs? Or composites?
If not, can I use other brand's aluminum hex hubs? What will fit
without any mods, Tamiya's, Xray's or HB's?
Thanks
Tech Fanatic
iTrader: (3)
Comes with composite wheel hexes
The aluminum ones are part# LOSA9686 (2 hexes)
Also two offset versions as well
.030" LOSA9687 (2 hexes)
.060" LOSA9688 (2 hexes)
$10 at losipartshouse
$13 at horizon
The aluminum ones are part# LOSA9686 (2 hexes)
Also two offset versions as well
.030" LOSA9687 (2 hexes)
.060" LOSA9688 (2 hexes)
$10 at losipartshouse
$13 at horizon
Tech Fanatic
iTrader: (13)
Ok, thanks dude. Im also selling my F1 kit (F109) I reached its limits...
Tech Adept
Here's a couple of pics of my 'new' ride - I've actually had it for a couple of years, but only recently had the time to install the electrics and run it.
It ran well, the setup wasn't far off, just needed more on-power steering, I need lots of that
It ran well, the setup wasn't far off, just needed more on-power steering, I need lots of that
wiggle
so if i hold one of the front wheel, i can still have a bit of wiggle in the other one. The play is worrysome.
Does everyone who has this car have that as well ? I tried turning my servo saver down all the way and it still does that.
Shouldn't the steering be tighter ?
Does everyone who has this car have that as well ? I tried turning my servo saver down all the way and it still does that.
Shouldn't the steering be tighter ?
Tech Elite
iTrader: (118)
No, the steering should NOT be tighter, it will drive like crap if you tighten it.
Tech Elite
iTrader: (118)
Has anyone tried the Orion 5000 Molecular in theirs? Does it fit without any mods? I know my TrakPower Dark 5000 fits without changing anything.
R/C Tech Elite Member
iTrader: (101)
makes it hard to set your toe.
So there's supposed a little slack?
Tech Regular
iTrader: (1)
Ben, are you racing at Coastal again? What class you running mate?
Tech Adept