|
Originally Posted by mrcdub
(Post 16212915)
How are you setting the uptravel to get 14.6. I've tried it using the Ronald Volker way. The arms are too high and the shocks are too compressed. Maybe I'm doing it wrong. Can someone please explain. I've attached pics to reference.
https://cimg1.ibsrv.net/gimg/www.rct...66c36e073e.jpg https://cimg2.ibsrv.net/gimg/www.rct...042256bd2a.jpg Also you should set up travel with shocks disconnected to get the most accurate setting. |
Nevermind.
|
The shocks were not connected when I set it the Volker way. I understand that it shouldn't be screwed in that much. That's why I'm asking how you are setting the uptravel.
|
Originally Posted by mrcdub
(Post 16212945)
The shocks were not connected when I set it the Volker way. I understand that it shouldn't be screwed in that much. That's why I'm asking how you are setting the uptravel.
The second picture showing the grub screw jacked all the way down is for droop. Up travel is set by the grub screws in the front upper bumper brace and rear body posts. Blue circle is droop screw Red to the front is up travel https://cimg3.ibsrv.net/gimg/www.rct...a40cf38c96.jpg |
|
Thanks, I appreciate everyone's response to my post
|
Originally Posted by archivist
(Post 16212811)
Team, I have a situation where I’m getting rubber from the belt caked up in my diff gear teeth.
Is this normal wear or is it indicative of some other issue? (Belt tension maybe?) |
Originally Posted by mbunker
(Post 16212994)
Do you have the gear diff install correctly. The belt pulley should be on left, drivers side of car.
|
Carbon chassis
Anyone tested a carbon chassis yet ? How does it feel on low and high traction ?
|
Hey guys, I'm currently building my MTC3 and I'm going to be running it on low grip asphalt. Does anyone know any shops in the states that has either 1.6 carbon or fiberglass top decks in stock?
I found them from Vigor at a shop is AUS but they won't ship to the states. Thanks. |
411
Smokem rc in AUS ships to the US , I just got an order from them last week for my mtc3 .
vigor parts . |
Originally Posted by SQC049
(Post 16214822)
Hey guys, I'm currently building my MTC3 and I'm going to be running it on low grip asphalt. Does anyone know any shops in the states that has either 1.6 carbon or fiberglass top decks in stock?
I found them from Vigor at a shop is AUS but they won't ship to the states. Thanks. |
Originally Posted by lbsnoopy
(Post 16214824)
Smokem rc in AUS ships to the US , I just got an order from them last week for my mtc3 .
vigor parts . I'm just concerned will all this tariff nonsense of something not getting delivered. |
411
Originally Posted by SQC049
(Post 16214849)
Interesting, when I tried to check out with them it said they don't deliver to my country.
I'm just concerned will all this tariff nonsense of something not getting delivered. |
Originally Posted by SQC049
(Post 16214849)
Interesting, when I tried to check out with them it said they don't deliver to my country.
I'm just concerned will all this tariff nonsense of something not getting delivered. |
| All times are GMT -7. It is currently 12:29 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.