geeunit1014

iTrader: (14)

If you are using other tires with this (sorex, jaco, etc), reduce camber, xenon tires liked a lot of camber. 2* f/r will be good w/ sorex & similar

Scooter79rs

iTrader: (9)

I actually run a similar setup as well but with the thick chassis plate and less camber on a outdoor ashphalt/rubber setup.

cyrrus

iTrader: (5)

hey guys thanks for the set up.

just a quick question on the tfr shock used. did you use tamiya springs also and the shock mount for a tfr car. i have all part avail. ummm nice working on a tc car again. took last season off. can't wait till this summer season to start.

okay i'm going to be running sorex 28r for a bit then going to try sweeps out.

so what go down 2 degree or more all around since using sorex's

cyrrus

iTrader: (5)

geeunite thanks for the info. should of read more then just jumping to a thank you lol

thanks all

oh what the internal ratio on this car. by the way need to calculate my roll out lol

Andrew

geeunit1014

iTrader: (14)

I used the Associated springs, and the Tamiya mounts for the top. I used the TC5 shock end and mount for the bottom. Also used the Tamiya spring retainer.

Id start with 2* all around. Thats what I ran most of the time on sorexes.

Transmission ratio is 2.0. With rubber, most gear by FDR (final drive ratio) rather than rollout. FDR = (spur/pinion) * Trans. ratio

W.E.D.Jim

iTrader: (17)

Here are some Touring car bodies I hope you guys dig. Inspired by Roly, done for Ryan C.









...Jim
W.E.D.
www.wedjim.com

Scooter79rs

iTrader: (9)

Oh very nice, what body is that?

Exotek are very good at shipping their oders, my order was shipped Weds/Thurs last week and it arrived today which is pretty good as Fri and Mon were public holidays.

I know what I'm doing tomorrow!

pakk

iTrader: (80)

Is that just the chassis on the left? or is it the whole package?

Scooter79rs

iTrader: (9)

I got the whole lot looking forward to driving it now.
Finished the build, beside one missing screw for the top deck it went pretty good.

spongerX

What heat sink and fan combo is that on your car?

pakk

iTrader: (80)

looks like the LRP one.

I asked about the chassis because I have the same setup. I got it a while ago when the chassis first came out. I want to replace just the chassis with a new one.

Scooter79rs

iTrader: (9)

Yep its the LRP one.
With the chassis yeah it did come with the everything on the actually chassis it self, this one to be exact

Jsaves

iTrader: (4)

Could you maybe take a pic so I can see how you mount the antenna?
Thanks and God Bless

Scooter79rs

iTrader: (9)

Here ya go.


The mount comes with the top deck which mounts to the chassis.

poncec23

iTrader: (11)

my TC5 i call it the "red rocket"