Tekno RC SCT410.3 Thread
|
|||
#3796
When we had tekno shafts in our Traxxas slash's the shafts came with o'rings for exactly what your saying. Were still noisy as heck ..
#3797
Is there any up grade for more of a automotive style universal joint. This pin and a slot design really blows..
Last edited by SerpJimmy; 06-11-2016 at 06:12 AM.
#3799
Tech Regular
#3800
#3801
Tech Regular
#3802
as you can see from the plethora options for pin and slot alternatives, scaling down anything from the 1:1 world is not easy, simple, lighter, stronger, cheaper, or better.
I have seen some CV joints that use ball bearings, but there were some negatives to them. Weight, and the need for suspension travel are all barriers.
MIP make their CVD kits, but they are tanks needed to be strong enough. They use a sliding shaft to account for suspension travel.
I have seen some CV joints that use ball bearings, but there were some negatives to them. Weight, and the need for suspension travel are all barriers.
MIP make their CVD kits, but they are tanks needed to be strong enough. They use a sliding shaft to account for suspension travel.
#3803
No oring under shock collar (preload adjuster)? Just want to make sure
#3804
If I understand you correctly, yes, you want the o-ring in the inside groove of the pre-load adjuster. It will give it just enough friction to keep the adjuster fro moving unintentionally.
#3805
Didn't see a groove on the stock plastic adjusters and don't have a o-ring, that was my concern, that the adjusters would be free to move without it
#3806
Tech Adept
#3807
#3808
Tech Addict
iTrader: (1)
I never stated you want a cold battery, but you dang sure don't want a hot one either.
They are essentially just warming their packs up to get the chemistry to release electrons more efficiently due to thermal expansion.
But... There is a threshold for which is optimum over a run. Being to cold as well as to warm will exponentially decrease your performance.
Additional caps them selves are important to further normalize the voltage and amperage output to prevent crossing said threshold.
Trust me when I tell you a cap pack WILL make your setup better!