219LikesTekno RC SCT410.3 Thread
09-05-2022, 08:19 AM - Wikipost
|
|||
|
|||
|
Welcome to the SCT410.3 Wiki!
7.26.17 - BB In order to run the recommended team setup, you need the following optional parts: TKR6106 Orange LF Springs TKR6114 Green LF Springs TKR6018 composite shock caps (built to emulsion) OR TKR8702 Aluminum Emulsion Shock caps TKR8027 Shock Stand Offs TKR6051 8x1.3 pistons(drilled to 1.4mm) TKR8104 .4 bellcranks TKR8100 .4 ackerman TKR5545B HRC Hubs You also need the Aluminum C Block (others can stay composite) What option parts should I consider buying with a new kit? None are required but we recommend the following: TKR5161 – V2 Adjustable Hinge Pin Brace “A” block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes. TKR5163 – V2 Adjustable Hinge Pin Brace “C” block, 7075 CNC, EB/NB/ET/NT/SCT) - Helps to improve durability on hard crashes. TKR5545B – HRC Rear Hubs (L/R, CV or uni, SCT.3/SL) - Improves stability of the rear on mid to corner exit. Allows harder acceleration on corner exit. TKR6146 - CNC Delrin Shock Cartridge Set TiNi Shock Shafts -TKR6004T (front) -TKR6017T (rear) What spare parts should I keep on hand? TKR5020 – Hinge Pins (inner, front/rear) TKR5516 – Front Suspension Arms and TKR5515 – Rear Suspension Arms TKR5542 – Spindle Carriers - TKR5541B Spindles TKR6009 – Shock O-Ring and Bladder Set (for 2 shocks) Tips and Tricks List of Vehicle Setup Adjustments and Build Tips can be found here. There are several videos and articles detailing the building of shocks, diffs, camber links, etc. Use steering stops/limiter washers... more info here. Setup Sheets: Setup sheets for all Tekno RC vehicles can be found here. Please be sure to try our recommended setup. It works very well on most tracks.   Hinge Pin Insert Chart:  Warranty Policy: Tekno RC is the only company in the industry that will give 50% off of parts if returned to them using the General Warranty return policy found on their website. The parts can be lightly used or completely abused, as long as the part is still being produced it's covered! Piston Drills: Some of our setups recommend using pistons that are enlarged. For instance 4x1.9 or 3x2.0. To drill the pistons we recommend the following: GMK Supply Piston Drill Set 16PC Metric Bit Set Metric Sizes 2.00 to 3.00 MM.   
|
04-07-2015, 10:56 PM
#196
TKR5016B – Gearbox (rear, angled)
TKR5049A – Pivot Balls (6.8mm, no flng, sway bar, shck ends, almnm, 4pcs) TKR5052A – Pivot Balls (6.8mm, inside camber, steering links, aluminum, 4pcs) TKR5053A – Pivot Balls (6.8mm, flanged, outside camber, aluminum, 4pcs)
TKR5058A – Pivot Balls (5.8mm, no flange, brake/steering link, aluminum, 4pcs) TKR5079A – Stabilizer Balls (6.8mm, sway bars, aluminum, 4pcs)
TKR5165 * V2 Hinge Pin Inserts, Wheelbase Shims (EB/NB/ET/NT/SCT)
TKR5188 * Rod Ends (6.8mm, M4 thread, SCT/SL, 8pcs)
TKR5212 – LCG Motor Mount Insert (aluminum, gun metal ano)
TKR5260 * CNC Split Cntr Diff Mount (mtr mnt only, 7075, gun metal ano, EB/ET/SCT) TKR5263 * Split Cntr Diff Mount (composite, requires TKR5260, EB/ET/SCT/SL) TKR5288 – Chassis (7075, black anodized, lightened)
TKR5491 * Sway Bar (2.4mm, rear)
TKR5515 * Suspension Arms (rear, SCT.3/SL)
TKR5516 * Suspension Arms (front, SCT.3/SL)
TKR5518B – Front Bumper Set (SCT410)
TKR5541B * Spindles (6x13x5mm outer bearing, L/R, SCT410/EB48SL)
TKR5545 * Rear Hubs (L/R, CV or uni, SCT.3/SL)
TKR5548 – Decal Sheet (SCT410.3)
TKR5554A – Spindle Bushings (SCT410, 4pcs, aluminum, hard ano)
TKR5555A – Arm Bushings (SCT410, 4pcs, aluminum, hard ano)
TKR5570B – Stub Axles (SCT410, hardened steel, 2pcs)
TKR5571M * Wheel Hexes (steel w/ set screw, lightened, 12mm, SCT410/SL) TKR5575X – Diff Coupler (SCT410, f/r, hardened steel, lightened)
TKR5579 * Tapered Driveshaft (SCT/EB48SL, center, front, 7075 aluminum, black ano) TKR5581 * Shock Tower (front, 7075, black ano, SCT.3/SL)
TKR5584 * Shock Tower (rear, 7075, black ano, SCT.3/SL)
TKR5730 * V2 Adj. Hinge Pin Brace Set (composite, EB/NB/ET/NT/SCT)
Diff
TKR5149X – Differential Cross Pins (composite, 3pcs) TKR5614X – Differential Outdrives (SCT410, f/c/r, lightened)
Shocks
TKR6140 * Locking Shock Rod End and Spring Perch Set (EB/NB/ET/NT/SCT) TKR6143 * Shock Boots (medium length, front, EB/NB/SCT, 2pcs)
TKR6144 * Shock Boots (long length, rear EB/NB/SCT, front ET/NT, 2pcs)
Hardware
TKR1215 * M5 Locknuts (aluminum, flanged, serrated, black, 4pcs) TKR1238 * Droop Adjustment Screws (M4x10mm, 8pcs)
TKR1605 * M3x10mm Set Screws (black, 10pcs)
TKR1609 * M3x3mm Set Screws (black, 10pcs)
TKRBB05134 – Ball Bearing (5x13x4, 4pcs) TKRBB06135 – Ball Bearing (6x13x5, 4pcs)
Cheers
04-08-2015, 07:32 AM
#197
does anyone know when these are going to start shipping, I can't wait to get my build on
04-08-2015, 07:39 AM
#198
I might have missed this somewhere but here goes what size are the turnbuckles for the new truck? I have heard the same and that only 4mm rods on all 6? Help please thanks
04-08-2015, 07:40 AM
#199
Tech Master
Pete @ fiercercsolutions.com has first shipment on the way now, tracking says they should be at his place Monday. Still 3 unclaimed, might want to get in on those 3. (Mines one of the claimed ones.)
Last edited by ezlight; 04-08-2015 at 08:42 AM.
04-08-2015, 12:22 PM
#200
Woo Hoo!Tekno shipped my new 410.3 today!
04-08-2015, 12:48 PM
#201
Got one preordered. Think I'm going to give the LRP 10L 4700 a shot and see how it hangs with the 4300HD.
04-08-2015, 12:49 PM
#202
04-08-2015, 03:27 PM
#204
04-08-2015, 04:53 PM
#206
Tech Master
iTrader: (53)
Join Date: May 2011
Location: Wherever my alien friends take me.
Posts: 1,748
Trader Rating: 53 (100%+)
04-08-2015, 05:00 PM
#207
Tech Master
Ok, thoughts. I run on a small-med indoor tracks (astro & clay) And about to start the outdoor tracks when they open (hopefully soon) Here are my motor choices. Tekin Pro4 4000kv, tekin Pro4 HD 4300, & hobbywing 4700kv. I have all 3, so it's not deciding on what to buy, just what would be the better choice. I have mod1 pinions 13t-20t
I've ran the 4300HD in my last truck with 15t pinion, but have yet to try the other two.
I've ran the 4300HD in my last truck with 15t pinion, but have yet to try the other two.
04-08-2015, 05:05 PM
#208
to those of you that are running a tekin rx8 gen 2 in your tekno,would the tekin TT3811 100mm sensor cable be long enough to reach from the esc to the motor?i will be hooking it up to a hobbywing 4700kv motor,so i want to make sure it is long enough and compatible.I also ordered a hotwire for it,will there be anything else i need to make this work?This is my first tekin esc and i just wanted to know what parts,adapters i will need to make it work?
04-08-2015, 05:07 PM
#209
Tech Master
to those of you that are running a tekin rx8 gen 2 in your tekno,would the tekin TT3811 100mm sensor cable be long enough to reach from the esc to the motor?i will be hooking it up to a hobbywing 4700kv motor,so i want to make sure it is long enough and compatible.I also ordered a hotwire for it,will there be anything else i need to make this work?This is my first tekin esc and i just wanted to know what parts,adapters i will need to make it work?
04-08-2015, 05:08 PM
#210