|
I was thinking for spares
I had previously owned an rc8t For 2 years never broke anything! Had tons of spares! Just might go with few necessities |
Silly request. Can somebody please measure the distance on the chassis from the rear holes for the center diff mount to the front holes of the rear gearbox (center to center)? Thanks.
|
Is steel spur really a necessity?
|
Originally Posted by mamdot91
(Post 13219155)
Is steel spur really a necessity?
|
Originally Posted by turtletrax
(Post 13215339)
So are there any options for more normal looking bodies and to get them to fit without big gaps?
I wasn't allowed to take the Serpent stickers off since Joe needs this body for the E-Nats next weekend. So I put masking tape and then a tekno sticker over them before I got to the track lol But heres what a wolf in sheeps clothing looks like. http://i.imgur.com/giMYA1ol.jpg |
Any word on when the stock bodies will be available again?
|
Originally Posted by 8ight-e
(Post 13218730)
Truggy was sick today on flippin rails.. fastest vehicle of any class on the the track.. TQ and lead the 20min a-main until my pack dumped at 17.5 minutes in, was actually a full lap over the field with some great drivers. I used 3775mah on my 6s 4000mah pack... doing the math a 6s 4300mah would be just enough pack to make it 20minutes. though 4500 would be ideal for a little buffer. I too walked over the start and had a friend put me down on the grid. This truggy was flat out awesome today though.. super happy w/ it and my setup. BTW running the LRC pills in the rear w/ the lowest position on the FR hinge. Pistons are the Red v-port and I'm not touching them.. EDIT and yes LVC was too conservative :P
|
Length width and higth
I'm trying to buy a Truggy bag and don't have my truggy handy can someone post the dimensions with and with out wheels and with the wing.
tekno site says: Length= 595 millimeters = 23.4251969 inches width= 420 millimeters = 16.5354331 inches Bag Im looking at says it will hold a truggy http://www.integy.com/st_prod.html?p...ratesortby=New http://lghttp.18397.nexcesscdn.net/8...c24007blue.jpg Dosen't look big enough??? |
anybody running mechanical brakes on their truggy?
|
Still need a few changes to get mine dialed to my style but good for 1st time out. Big thanks to tekno driver Mark Unrath for sharing some setup advice and even letting me take a lap with his ride.
|
Originally Posted by turtletrax
(Post 13220932)
Still need a few changes to get mine dialed to my style but good for 1st time out. Big thanks to tekno driver Mark Unrath for sharing some setup advice and even letting me take a lap with his ride.
It was great meeting you and racing with you. Fun times this past weekend. Feel free to hit me up with any questions you might have. I'm always happy to help. Mark |
any loose outdoor setups yet? anybody using mechanical brakes?
|
Originally Posted by mamdot91
(Post 13219155)
Is steel spur really a necessity?
|
Originally Posted by boudin4evr
(Post 13223106)
any loose outdoor setups yet? anybody using mechanical brakes?
Mark |
Originally Posted by munrath
(Post 13224558)
Marc - Take a look a several pages back as I posted my motorama setup. I've made some droop changes but otherwise it's the same setup I'm running now and that others have been using. If you can't find it let me know and I'll post it.
Mark can u post it please thanks |
| All times are GMT -7. It is currently 04:58 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.