Didn't get the manual, but should be able to find it online and print. I'll be running it at an indoor clay high bite surface SDRC Raceway. Will the stock setup be good for those conditions.

What pinion do I want with a 1900kv motor. I have a 20 tooth. Is that to much.

Also are u guys using a 270mm sensor wire .

Your gonna have to dremel the flat closer to the motor.

15 or 16t pinion. Yes on the 270mm if you are running the batt back.

Cool, thanks. Are there any mods im gonna want as im new to ebuggy.

Aluminum servo saver top

Do u have a model number.

TLR244021
http://www.amain.com/team-losi-racin...Product-Feeds&

Im going to try RM surf city set up and it looks like i have everything to do it except the "8ight T 3.0 caster blocks spaced forward."...Does anyone know what part that is?

Thanks

Truck front spindle carriers TLR244016

A brother is ready to get his bash on.....
I might even decide to slick the hair back, throw on the wife beater n start slappin' it down with hop ups....Get my slap on.

You will need to shim the caster. I used a scte steering rack bearing. I put the longer screw through the back and the short screw up front.

Any must do or improvements for a 3.0 -E truggy ? Thx