Abyss

Thanks for spur gear help, another question about springs. It came with pink? So if I go to green they will be stiffer correct?

spunkysandoval

iTrader: (125)

I put a tekno RX box on my trimmed up mud guards to help keep all the stuff in place. Just wanted to show people what this looks like if they are looking for something similar. This is a tekno v4 rx box.







Another thing I want to mention is using fuel tubing in place of the stock shock mounting hollow balls. I did this to eliminate some of the play at the shock stand off and it worked very well. I just cut a 1/4" piece of fuel tubing and greased up the shock stand off so that it moves freely when mounted up.




Here is how it looks mounted up. Zero play and no binding because of the grease

rcmiket

iTrader: (22)

Pete!! Now I have another Tekno buddy at LHR! I qualified 5th, and was totally bummed not running the main. This was the worst qualifying with this truck yet for me. I was just off my game that day. Just got back from a week long cruise, and all the travel to get home.

I am currently 2nd in stock SC, 2nd in EBuggy (EB48), and 11th in 4x4 SC (I missed the first two weeks). Hoping to finish top three in all three classes for the winter series.
Let's compare notes on the 24th.

FastPete

iTrader: (44)

Yes sir. Was sitting right at the other end of the table u were at. This truck is great, I got faster and faster every round. And theres so much more in it, and me. lol

Lets catch Randy

Gene158

iTrader: (3)

What bodies are all you guys running? What do you all think fits/looks best? Right now I'm running the proline flotek and I'm not thrilled with how it looks.

kjohnsiii

iTrader: (55)

Nice truck spunky!
Do the aluminum shock caps have bleader screws on them for emulsion..

spunkysandoval

iTrader: (125)

no, these don't have a bleeder for emulsion. They are the cnc caps from the EB

Gary NJ

iTrader: (8)

Talk to me tomorrow at IRH Bobcat - I can give you the skinny.

08supermoto

iTrader: (5)

Thanks Timamybrown, Iv'e heard of the axle problem, gonna look into it a little more.

I only race so i'm really hoping the axle problem was more geared to bashers.if not i'm gonna have to fix that problem.

j.voorhees30

Just came back k from first large race with this truck only second time on off road with it 20 trucks in pro4 open short court seperated by less then 3 laps from tq back to last in the cmain was close started in the c bumped my to the b by 1.5 seconds ran the b was running in the bump up spot and got knocked off track by a lap down truck ended up fourth had a blast onyx four pole 4500 kv motor and esc was fast I was only .3 seconds off tq fastest lap wrong tires on a quickly drieing track and my driving ability limited the truck.... learned a lot and know what I need for Easter seals charity race next weekend btw I love my tekno

RavensNightFury

iTrader: (7)

Hey guys I just took my truck for a run again the motor and esc is very hot you cant touch it its got stock spur with 14 pinion with exp thx down to 65 I am runing 4700kv hw should I go down kv or lower pinion

Wildcat1971

iTrader: (84)

I was looking at the pic above and thought, wow that must be the shortest rear driver shaft ever. lol What is it 1 inch?

kjohnsiii

iTrader: (55)

Wild cat, your right it is about an inch long and the front is about 6-8 inches. One of the nice designs for the truck. The drive lines run Straight up and down the chassis. Way les drag on everything.

Wildcat1971

iTrader: (84)

yeah, that is very appealing, lets face it size does not mater right.....

j.voorhees30

I am running the flotek Chevy body at the moment looks good but I think my next body is gonna be the jconcepts Ford super duty hiflow