Originally Posted by superslow (Post 11423400)

Release time frame please

Originally Posted by Cain (Post 11423430)

Curious, and if you rather wait to answer thats fine, but, would this be compatible with some of the cool features the EB48 can use like the Traktion drive and the mechanical brakes setup?

Originally Posted by teknorc (Post 11423473)

It's funny, the other day during testing I noticed the motor brakes causing a slight push and thought about hooking up some mechanical brakes.

Originally Posted by rcmonkey (Post 11423600)

Sweet! No need to buy all new wheels/tires.

Originally Posted by teknorc (Post 11423317)

Some of the basics:
The SCT410 will share about 75-80% of the parts from the EB48 (diffs too). That means there are already spares on the market and there are already a load of options available before it gets released.

People have been clamoring for an SCT with true 1/8th scale roots and we have answered the call. But we didn't phone it in. There are a lot of newly designed parts on the car to replace some of the heavier 1/8th scale parts and keep the weight down.

In full trim (all bumpers, side guards, with a big 6400mah 2s battery) the truck is ~6.7lbs. With optional parts and a shorty pack, it's a couple ounces over the minimum at around ~5.7lb with room to possibly go even lower. We'll have a very simple how-to video explaining how we got the weight so low.

For indoor use we've found lighter is better. For outdoor tracks that are rougher, the truck feels better when it's a little heavier. The good part is that you can tailor it to just about any situation.

As far as durability, normally we're pretty modest, but we think it's the most durable truck on the market - hands down. Handling is consistent and can be tuned to suit different driving styles. Hard anodized 16mm shocks anyone?

Originally Posted by boyfromoz (Post 11423730)

Very nice Danny. I saw you running PRO 4 on Wednesday night when I poped in at SDRC and mentioned to Fredog...."When did Danny start running PRO4?"... and Fred mentioned you wipped on him at the Trackstar race. He never mentioned this release and I didn't put 2 and 2 togther.

I't all making sense now :-)

Congats on the new release!! It looked hooked up!!!

Originally Posted by superslow (Post 11423632)

It will take scte wheels

Originally Posted by Cain (Post 11423638)

for some of us lol.

But, I am quite sure people wanting this buggy are willing to switch if necessary.

Used market for SCTE mounted tires just went up :)

Originally Posted by teknorc (Post 11423745)

Thanks man. Hope to see you out there racing again soon.