17LikesTekno SCT410 Thread
02-11-2014 | 11:56 AM
Yes, you can view it here
This is the setup I will be starting with at Motorama this weekend. A large track known to blow out and be rough. I will be testing different spring combos and will post updates throughout the weekend and upload a revised setup sheet after.
I will post updated setup sheets and general race updates here
This is the setup I will be starting with at Motorama this weekend. A large track known to blow out and be rough. I will be testing different spring combos and will post updates throughout the weekend and upload a revised setup sheet after.
I will post updated setup sheets and general race updates here
02-11-2014 | 02:54 PM
Tech Fanatic
Joined: Aug 2008
Posts: 903
From: San Antonio, Texas
02-11-2014 | 03:23 PM
When I ran the 2013 East Coast Mugen Challenge, back in August I was running the "rcgod" setup and running 7/7/4 for diffs and 2.9 rear spring rate.
Lookup the 2013 East coast Mugen Challenge race on Youtube or "snwchris" and you'll see a video of the track. By late saturday and into sunday the track was getting rough and loose, but the tekno handled sweet.
Lookup the 2013 East coast Mugen Challenge race on Youtube or "snwchris" and you'll see a video of the track. By late saturday and into sunday the track was getting rough and loose, but the tekno handled sweet.
02-11-2014 | 03:32 PM
Suspended
iTrader: (14)
Joined: Aug 2013
Posts: 444
The Hudy 1/8 off road station will work with this truck. You just need
http://www.teknorc.com/shop/tkr5571-...ct-width-4pcs/
http://www.teknorc.com/shop/tkr5571-...ct-width-4pcs/
That is what the integy guy told me to and I got them and had to drill them put cause the I'd is 5 I need 6 so I need to get the g adapter to do it without making modifications or just use the tekno part listed above
02-11-2014 | 03:36 PM
EC Mugen vid, just quick video, I'm the first one with Orange and Black
http://www.youtube.com/watch?v=hrjiHG_K9y4
http://www.youtube.com/watch?v=vUmyd5tZ660
Track was built by Joey C from DIRT
http://www.youtube.com/watch?v=hrjiHG_K9y4
http://www.youtube.com/watch?v=vUmyd5tZ660
Track was built by Joey C from DIRT
02-11-2014 | 04:05 PM
Tech Addict
iTrader: (5)
Joined: Apr 2007
Posts: 726
02-11-2014 | 04:39 PM
When I ran the 2013 East Coast Mugen Challenge, back in August I was running the "rcgod" setup and running 7/7/4 for diffs and 2.9 rear spring rate.
Lookup the 2013 East coast Mugen Challenge race on Youtube or "snwchris" and you'll see a video of the track. By late saturday and into sunday the track was getting rough and loose, but the tekno handled sweet.
Lookup the 2013 East coast Mugen Challenge race on Youtube or "snwchris" and you'll see a video of the track. By late saturday and into sunday the track was getting rough and loose, but the tekno handled sweet.
02-11-2014 | 04:47 PM
02-11-2014 | 05:50 PM
Tech Master
iTrader: (7)
Joined: Jul 2011
Posts: 1,017
[QUOTE=brandon32689;12999550]That's is what I was thinking, I wanted to see if anyone has tried it. I orderd the integy set thinking that is what I needed ,but that is basically the same thing I had. all I needed was the adapter so I am going to send integy set back or sell it to my buddy and get the adapters needed and use my hudy.
I have them and they work well. A little finicky to assemble but not bad.
I have them and they work well. A little finicky to assemble but not bad.