Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
#1474
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
The tranny is done but there is a little side to side play with my diff. Is this normal? It's not much.......
#1476
Tech Legend
iTrader: (1212)
Japanese setup, except .5 rear carriers and running in saddle config. Totally hard to gauge the traction as the track was slicker than snot(everyone had trouble). Car jumps/lands like a dream. Had lots of steering once I found the right fronts in the 2nd heat. I could take The triple that is normally a double single much more consistently(as long as I felt like I had the traction) and was lined up and clear the table top/single more consistently.
I think I'm going to try full stick pack as the japanese setup next time and maybe play with shorty and use foams for placement.
I think I'm going to try full stick pack as the japanese setup next time and maybe play with shorty and use foams for placement.
#1479
#1481
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
Thanks for the tips guys! Made it to step 20. Lol
#1483
Tech Legend
iTrader: (1212)
Here is a pic of my thumb screw down. I scribed a line on the under side of my battery strap and cut there with a strong razor knife. about 1~2mm of drilling the hole for the screw to go in it got really easy as it gets hollow from the bottom for the M3 screw. I cut the heads off of 2 15 or 16mm M4 screws, so about 7mm is on each side.
#1485
Moderator
iTrader: (470)
Join Date: Nov 2009
Location: North Carolina by way of SoCal!
Posts: 4,785
Trader Rating: 470 (100%+)
Any Saturday race reports?