Kyosho Ultima RB6 & RB6.6 Car Thread
|
|||
My first post here in the Kyosho world. I'm acquiring a used RB6 hopefully tomorrow and want to put a new body on it, rear motor configuration. What is one of the best looking bodies in your guys opinion? (i know its subjective, but still looking for a good place to start looking. JConcepts Finnisher perhaps?
Tech Regular
iTrader: (15)
My first post here in the Kyosho world. I'm acquiring a used RB6 hopefully tomorrow and want to put a new body on it, rear motor configuration. What is one of the best looking bodies in your guys opinion? (i know its subjective, but still looking for a good place to start looking. JConcepts Finnisher perhaps?
Super Moderator
iTrader: (81)
My LHS is having great difficulty keeping Kyosho spur gears on the shelf. I know that between my RB6 and my RT6 I've been through 7, and the other RB6 driver that races with us has DNF'd at least a couple of times.
I just replaced my gearbox, bearings, top shaft and pinion. I made sure everything was super free in the gearbox and that my slipper was set so that it barely raised the front wheels.
Right now I'm debating whether it is spur gear #8 or b5m #1
I just replaced my gearbox, bearings, top shaft and pinion. I made sure everything was super free in the gearbox and that my slipper was set so that it barely raised the front wheels.
Right now I'm debating whether it is spur gear #8 or b5m #1
No matter how experienced one may be it doesn't hurt to have someone else take a look at what you have because even the best ones get blind eye once in a while.
Tech Champion
iTrader: (68)
so who is the goto guy to paint bodies for my b6 and mp9e? thanks
I was hoping a world's buggy was coming so u could have a rb6 like tebo runs without having to buy all of the option parts he runs separately
Okay went to the track today, and I got the car to come a long ways. But still isn't very good...
Here is a picture of my setup sheet:
http://i.imgur.com/OhB6khl.png
The car like this is decent, but surprising as it sounds it still is lose in the rear. I'd say it has enough steering (not to much but enough), but still needs more rear traction. Also to kinda explain more, I feel it needs more on power traction, and maybe more off power also. Was going to stay after and practice but their rebuilding the track.
Here is a picture of my setup sheet:
http://i.imgur.com/OhB6khl.png
The car like this is decent, but surprising as it sounds it still is lose in the rear. I'd say it has enough steering (not to much but enough), but still needs more rear traction. Also to kinda explain more, I feel it needs more on power traction, and maybe more off power also. Was going to stay after and practice but their rebuilding the track.
Tech Regular
iTrader: (9)
Tech Addict
iTrader: (2)
Okay went to the track today, and I got the car to come a long ways. But still isn't very good...
Here is a picture of my setup sheet:
http://i.imgur.com/OhB6khl.png
The car like this is decent, but surprising as it sounds it still is lose in the rear. I'd say it has enough steering (not to much but enough), but still needs more rear traction. Also to kinda explain more, I feel it needs more on power traction, and maybe more off power also. Was going to stay after and practice but their rebuilding the track.
Here is a picture of my setup sheet:
http://i.imgur.com/OhB6khl.png
The car like this is decent, but surprising as it sounds it still is lose in the rear. I'd say it has enough steering (not to much but enough), but still needs more rear traction. Also to kinda explain more, I feel it needs more on power traction, and maybe more off power also. Was going to stay after and practice but their rebuilding the track.
Tech Elite
iTrader: (47)
Finally finished how I wanted to mount it.
Tech Elite
iTrader: (47)
I have yet to try it like this, but I have the aluminum pivot as well as could run a wider rear pivot to free it up on power if I need to I think.