|
Originally Posted by J_Fitz
(Post 11347755)
Anyone know what size wheel nuts fit a hex converted 2wd SC10 ? I ordered the sc10 4x4 Jconcepts nuts and they aren't the correct threads.
|
Originally Posted by J_Bone
(Post 11347780)
8-32, AE part #6952
Thanks man, these are the ones I need: http://www.amainhobbies.com/product_...Nut-Set-Blue-4 Not these: http://www.amainhobbies.com/product_...Nut-Set-Blue-4 |
Originally Posted by J_Fitz
(Post 11347755)
Anyone know what size wheel nuts fit a hex converted 2wd SC10 ? I ordered the sc10 4x4 Jconcepts nuts and they aren't the correct threads.
|
Thanks for the feedback. Green Truck front springs.... Are these 22SCT springs or 22T? or are they the same LOL....
Thanks |
Originally Posted by Bob Barry
(Post 11348258)
Thanks for the feedback. Green Truck front springs.... Are these 22SCT springs or 22T? or are they the same LOL....
Thanks |
I will get either the AE springs or the Avid ones down the road. Losi ones are just readily available.
|
8-32 nut, get low profiles ones. The sc10 4x4 is 4mm I think. metric for sure.
|
woot, my kido won her class tonight, no thanks to me. lol. She broke the truck the first 2 heats. In the main she was not going full speed and was like crap, something is wrong. When I asked her is something was wrong, she told me she was tired of breaking and was just singling the jumps and keeping it on all fours. She won, so who am I to complain, I was very please with her making a judgement call and flowing through. Life lessons in rc. on the downside, I only did 1.5 more laps than her in my heat....she will be beating me soon, wtf. I did a 8 5:03, she did a 7 5:51..........
|
Originally Posted by jstump
(Post 11345130)
Are the Rs Brushless and Factory team transmissions the same?
|
Originally Posted by jstump
(Post 11351221)
Nevermind i for my answer from rc10.com opened up both manuals both are the same.
|
Originally Posted by Prostreet314
(Post 11344905)
Does anyone know where to get just the c-clips for the hex axles in front? I converted my ft over to hex and I have one c clip that pops off internally every time I tighten down the wheel nut. It was on the loose side when I took it out of the package so I figure it needs to be replaced. Or is there a better part to use? Thanks
|
My local track has gone indoor, cement with wooden jumps. Should I run sway bar on rear or let body roll help with corning traction?
|
Originally Posted by Wildcat1971
(Post 11348489)
woot, my kido won her class tonight, no thanks to me. lol. She broke the truck the first 2 heats. In the main she was not going full speed and was like crap, something is wrong. When I asked her is something was wrong, she told me she was tired of breaking and was just singling the jumps and keeping it on all fours. She won, so who am I to complain, I was very please with her making a judgement call and flowing through. Life lessons in rc. on the downside, I only did 1.5 more laps than her in my heat....she will be beating me soon, wtf. I did a 8 5:03, she did a 7 5:51..........
|
For anyone using the avid springs, are you using the truck fronts or what?
|
Team Associated SC10 2WD #7034 10Mil Chassis Protector
Hi Guys,
I have made a 10 Mil Chassis Protector for Team Associated SC10 2WD Short Course Truck Suitable for AE part number #7034 but also fits other AE SC10 2WD variants. see if anybody interested ;-) Cheers !! http://www.ebay.com/itm/321007605686...84.m1555.l2649 |
| All times are GMT -7. It is currently 11:49 AM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.