AVID Clamping kit...
http://www.avidrc.com/shop/images/pr...CONV-Built.jpg
http://www.avidrc.com/product/5/acce...ccesories.html

Still looks to be cheaper just to order the parts your self. But it does take the research out of it and just order all together.

What pinion with a 81 spur with a 9T brushless? Hard indoor clay with traction. Smaller track.

Is anyone using rpm front arms? I got tired of replacing the arms on my kids truck. So I bought the rpm front arms and outside hinge pins from the stock arms do not seem to fit correctly. The seem to be too long to put the screw in. The inside hinge pins were fine.

rpm arms require the use of gt2 outer pins...read the bold print at the bottom of the amain page. Hope this helps.


http://www.amainhobbies.com/product_...Black-GT2-SC10

ah, ok. I stole the front hub vertical pins from my t4 to make it work. I wonder is they are the same length.

Rcrw isn't clay. And it's a low-medium grip traction track. Start at 18 on the pinion

Anyone have a good setup for a med-high bite indoor clay track?

question: can I flip the 0 degree plastic B44 hubs left to right, to angle the turnbuckle back a bit, giving a little more BB clearance? I didn't notch (yet), and had to do some spacer work to get the clearance...

Yes

Anybody try these new proline body mounts yet? http://www.amainhobbies.com/product_...dy-Mounts-SC10
They look like they maybe a bit beefier than the stock mounts.

they look to be a bad idea. I can easily see those twist screw being ripped off on a race.

X2 !!!!!

Just orderd a SC10 FT !!!!

try cav or maifields setups. They are pretty good for that type of track.

wondering if any of you guys have gone to a bb setup of 32.5 wt oil in fr and 30 in the rear? Also, what type of track (traction, etc)? running on a medium traction (when groove comes up), hard packed dirt, smaller track.

seen only a few of you go with std stock setup for oils (30/27.5) and some go with 35/30 and find it's too stiff.

Also, do any of you guys know if cavalieri had the bb shocks at nationals? I thought he did, but his setup states he was running the 32.5/30 combo, but with kyosho springs.

thanks,

Yes, he was running the big bores with kyosho springs.