I have been running 13.5, I leave all the weights in but I have started running a shorty pack moved all the way forward. It has been the best of both worlds. You keep the rear traction, and plenty of steering while losing some weight from the smaller battery. Your milage may very. :sneaky:

Read something in my latest RC Car Action about a Jconcepts Anti-Roll kit for the SC10 - anyone have any links or info? I can't seem to find anything about it.

so my son has the rs rtr with the gear diff,what grease or oil are you putting in there? He has the reedy 3300 kv motor and i wanna start taking him to the track so I'm trying to get him dialed in,we run on med to high bite wet indoor clay,tires are barcodes,suburbs and beams

Thanks everyone for your assistance regarding my diff setup. I hardly get to come on here so i cant keep up with the thank you's :D.

BTW, is there a fix for the transmission case. I really dont like not being able to tighten those screws all the way to avoid binding. I use thread lock but sometimes they still get a bit loose. Would a rpm or aluminum case be the way to go to avoid binding?

I made some BK sway bars for my truck and they worked very well.

I run 5K diff oil at sdrc

How many of you are running a shorty in your sc truck? Do you like it better than a full. Primarily will be running 17.5 so the weight savings should be a big benefit. Thanks!

I think Cameron is using a Shorty? I want to try one myself.

I have been running a shorty for a little over a month now, and dont plan on going back to a full size pack. I really fell the truck became more responsive overall everywhere the track.

Wher do you guys get your sway bars and how do u make em?

i got the sc10 4x4 ones to fit on the back. Direct fit.

Big bore
 

Converted to big bore. The rear springs are rubbing on tie rods. What should I do. Thanks

maby make some little spacers to go off the top stand off and some on the bottom by the arms

Associated makes a rear kit that bolts right on.

http://www.amainhobbies.com/product_...-Bar-Kit-B4-T4

Any rumors of the AE big bores being close to production?