|
Originally Posted by light
(Post 10300437)
Amain Discount codes:
JAN/FEB2012 $100-$149.99 $5.00 off CALPJAN125 $150-$249.99 $12.50 off CALPJAN1212 $250-$749.99 $25.00 off CALPJAN1225 |
Build almost done but some questions?
I almost have my 811 Be built but had a few questions on wiring the RX8 with 1900kv. Most pictures look like the batteries are wired in series? and how do you charge both batteries or can they be charged seperate? I have HiTec X4 charger and will be running 2 2S 6500 lipo batteries.:confused:
|
Originally Posted by nasty4wd
(Post 10302211)
I almost have my 811 Be built but had a few questions on wiring the RX8 with 1900kv. Most pictures look like the batteries are wired in series? and how do you charge both batteries or can they be charged seperate? I have HiTec X4 charger and will be running 2 2S 6500 lipo batteries.:confused:
http://www.lrp.cc/en/products/charge...apter/details/ |
Originally Posted by nasty4wd
(Post 10302211)
I almost have my 811 Be built but had a few questions on wiring the RX8 with 1900kv. Most pictures look like the batteries are wired in series? and how do you charge both batteries or can they be charged seperate? I have HiTec X4 charger and will be running 2 2S 6500 lipo batteries.:confused:
|
Originally Posted by nasty4wd
(Post 10302211)
I almost have my 811 Be built but had a few questions on wiring the RX8 with 1900kv. Most pictures look like the batteries are wired in series? and how do you charge both batteries or can they be charged seperate? I have HiTec X4 charger and will be running 2 2S 6500 lipo batteries.:confused:
|
Originally Posted by Frank L
(Post 10302222)
On that charger it would be best to charge them separate because I think it peaks at 6amps. Pumping 6 amps into a 4s would take a lot longer than 6amps in to each 2s and then you don't have to fab up a 4s balance lead.
|
Originally Posted by Brian C
(Post 10302236)
Could be wrong but 6amps for 4s will charge the same time as 2s. It's still just 6000 mah or whathaveyou. It's if you charged in parallel that it would take longer. 4s is same capacity just higher voltage.
|
Originally Posted by nasty4wd
(Post 10302288)
Is everyone running the lipos in series in the 811 Be? Thanks
|
Originally Posted by Magnus F
(Post 10302219)
|
I'm sorry im trying to understand this 100%
which way do I hook up the lipo's to run the buggy, series or parallel?:confused: I have 2 2s 5000mah lipo's and I want a total of 14.8v I am going to separate the lipo's to charge. Thanks! |
In series, doubles voltage keeping capacity.
Parallell, keeping voltage doubles capacity. |
Originally Posted by rcjunky10
(Post 10302578)
Great find....I'll be fashioning one of those together today!
i need one of those too! anywhere to get one in the US? Chad, nice finish at the cape fear race the other weekend...car looked good! |
Here is where I bought my leads from:
http://epbuddy.com/index.php?main_pa...mnehm840t1kfm4 |
Originally Posted by Brian C
(Post 10302236)
Could be wrong but 6amps for 4s will charge the same time as 2s. It's still just 6000 mah or whathaveyou. It's if you charged in parallel that it would take longer. 4s is same capacity just higher voltage.
And on a sad note, no Cobra Be for me this season. Just had a talk with the lhs and they can only support onroad this year. Maybe when the economy gets better due to some miracle... Keep my fingers crossed. |
what are you guys doing for the servo horns, im sure no one is using the stock one
|
| All times are GMT -7. It is currently 02:51 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.