R/C Tech Forums - SC10 4x4 Thread

Has anyone found a different bladder that fits these cap well. The stock bladderes seem to be too stiff and hard for my taste. Seem like a softer more flexible bladder would offer better performance. I like a bit of rebound in shocks so am sticking to bladders for now

the_freak

11-02-2011 09:12 AM

Quote:

Originally Posted by ShortCourseOnly (Post 9859514)

The kits do not include the 1.5mm bar. I installed the yellow (2.2mm bar) on the front and the Blue (2.0mm) bar on the rear. the white is 1.8mm.

ok cool thanks for the corection on the swaybars

1Fastpede

11-02-2011 09:14 AM

Instructions say

White = 1.5
Blue = 2.0
Yellow= 2.2

Chris Jarosz

11-02-2011 09:18 AM

Quote:

Originally Posted by ShortCourseOnly (Post 9859514)

The kits do not include the 1.5mm bar. I installed the yellow (2.2mm bar) on the front and the Blue (2.0mm) bar on the rear. the white is 1.8mm.

White: 1.5mm
Blue: 2.0mm
Yellow: 2.2mm

The most current swaybar kits are coming with a 4th bar.

Orange: 1.8mm

Evil Genius jr.

11-02-2011 09:20 AM

I just received sway bars form tower today and they came with 3 bars.
1.5 = white
2.0 = blue
2.2 = yellow

ShortCourseOnly

11-02-2011 09:23 AM

I stand corrected. Thanks for the details everyone.

ShortCourseOnly

11-02-2011 09:24 AM

Quote:

Originally Posted by old&slow (Post 9859532)

I know Krio used a Caster 13mm shock bladder on his. They are definitely more supple. I plan to just stay emulsion.

Cameron Kellogg

11-02-2011 09:27 AM

Quote:

Originally Posted by Evil Genius jr. (Post 9859585)

I just received sway bars form tower today and they came with 3 bars.
1.5 = white
2.0 = blue
2.2 = yellow

It was shown in Reedy pictures they had a rear bar that was 1.8 = Orange. Just not out yet. :nod:

Krio	11-02-2011 09:37 AM

Quote:

Originally Posted by old&slow (Post 9859532)

I'm running these in my shocks:

http://casterracingusa.com/product.p...&cat=46&page=2

zixxer

11-02-2011 09:39 AM

Quote:

Originally Posted by old&slow (Post 9859532)

http://www.ebay.com/itm/TSR-Team-Ass...item27be64b92c

good stuff and works on associated cars

special_k

11-02-2011 10:01 AM

2 Attachment(s)

I just got my MTK basket in last night and it looks great. I have my truck tore down and getting ready for the winter indoor season. I put the outside slipper dish and it fell right into the basket but I have not installed it on the truck yet. I have pics of it in the basket so I hope u guys can open them up I dont know how to put pics on here like everyone else.

edit: sorry for them being out of focus I used my cell phone

SS LS1

11-02-2011 10:27 AM

I'm not totally sure what your question is but the outer slipper pad should have an OD that is small enough to fit inside the basket like in your photos.

special_k

11-02-2011 10:40 AM

Quote:

Originally Posted by SS LS1 (Post 9859837)

I'm not totally sure what your question is but the outer slipper pad should have an OD that is small enough to fit inside the basket like in your photos.

No question someone had a pic on here a few pages back showing his not lining up right but I think it might have been his spur gear that the basket,disc and outer plate not alining right.

kghills

11-02-2011 10:44 AM

Received the chassis brace from Billy and installed it last night. It is hard to believe the difference. Tried the push on the shock towers with and without the brace while the belt covers were removed. Wow. I cannot help but think the setup for the truck with the brace will need to be drastically different compared to without it.

Keith.

BLbound

11-02-2011 11:57 AM

Quote:

Originally Posted by Krio (Post 9859368)

I ran those exact batteries all summer with my 4.5 turn 550 tekin motor without any issues. They felt warmer than average after dumping one, but never puffed and punch felt fine. Enter the tekin 4000kv 540 4 pole motor and those same packs came off the track warmer than I was comfortable with and one swelled a touch. I have since relegated my gens ace to 2wd and picked up 4 new 5600 mah 50-100C Hard case nano-techs and they come off the track as if I was running a stock buggy: cold.

Are you liking your 4000kv 540 4 pole tekin motor? Any want for the 4600? I want to get 1 or the other. I'm running a 550 4.5 right now, I like it a lot but I just want to try the power of a 4 pole :nod:

All times are GMT -7. It is currently 05:35 PM.

Page 666 of 2433

666

Show 40 post(s) from this thread on one page