R/C Tech Forums - SC10 4x4 Thread

The b44 optional lipo cradle is one solid peice. The b44.1 has two separate holders that are open on one side and use a another peice or optional weight between the packs to lock them in.

B44 LiPo Cradle

Silver04RS

07-15-2011 10:21 AM

Quote:

Originally Posted by Rick Hohwart (Post 9392992)

B44 LiPo Cradle

I have some good pictures of the B44.1 cradles in my saddle pack 4x4 build thead

Robotech

07-15-2011 10:38 AM

B44.1 LiPo Cradle

Wondering which one would be best suited for our application...saw your setup Silver...nice work.

Silver04RS

07-15-2011 10:44 AM

Quote:

Originally Posted by Robotech (Post 9393367)

B44.1 LiPo Cradle

Wondering which one would be best suited for our application...saw your setup Silver...nice work.

Thanks.... now hopefully it works :)

Id say the 44.1 would be better because you can move the packs independently and offset one if needed. You can also get rid of the room in between that the B44 strap doesn't let you do.

-Travis

Jmuck69

07-15-2011 11:09 AM

Amain has the titanium turnbuckles, lightweight outdrives, underbody cover, FT front shock shafts, FT front shock bodies, and FT steering bushings.

bohdi

07-15-2011 11:57 AM

Quote:

Originally Posted by Jmuck69 (Post 9393475)

Amain has the titanium turnbuckles, lightweight outdrives, underbody cover, FT front shock shafts, FT front shock bodies, and FT steering bushings.

can't wait for the full FT truck :lol:

mtnbiker67

07-15-2011 01:32 PM

How do you bleed the shocks on these with no rebound using bladders?

I can't seem to get rid of the rebound during bleed process.

What's the trick?

Thanks

Robotech

07-15-2011 01:47 PM

Quote:

Originally Posted by mtnbiker67 (Post 9393886)

How do you bleed the shocks on these with no rebound using bladders?

I can't seem to get rid of the rebound during bleed process.

What's the trick?

Thanks

Before you put your bladder on move the shock shaft about halfway up in it's travel. Then put the bladder on and then tighten down the cap. If you still have rebound remove the cap, push the piston up further and repeat until you have little to no rebound. Just kind of have to do trial and error.

racene1

07-15-2011 01:49 PM

Just got some bodies back from THE Paint Masta' Justin at 702 RC raceway in Las Vegas. This cat is Ubber-talented to say the least. The pics dont do these justice. Look at the detail of the Viper, each line and scale was cut and painted. The headlights are painted on the multicolored one not stickers!!!
Enjoy, oh yeah, and in case you were wondering; "DAMN RITE, they make me run faster, wanna see?" (in my best little kid, i just got a new pair of sneakers, voice)
http://i98.photobucket.com/albums/l2...h_84b4865b.jpg
http://i98.photobucket.com/albums/l2...h_561d5a0e.jpg
http://i98.photobucket.com/albums/l2...h_f6702a83.jpg
http://i98.photobucket.com/albums/l2...h_dd924ad8.jpg

mtnbiker67

07-15-2011 01:55 PM

Quote:

Originally Posted by Robotech (Post 9393940)

Thanks!

SaladFork

07-15-2011 03:24 PM

Quote:

Originally Posted by racene1 (Post 9393951)

Damn!! I need to have him paint up a body for Viper R/C for some magazine ads!! :nod:

Can you PM me Justins e-mail? :batman:

PanicRev

07-15-2011 03:35 PM

Quote:

Damn, thats some outstanding work right there. Love the rollcage. I may have to try that.

aaronblanton

07-15-2011 04:01 PM

bodies

nice looking bodies

Vegatron75

07-15-2011 04:58 PM

Quote:

Originally Posted by sparkwraps (Post 9392428)

For those that are looking to modify their gear cover for Mac The Knife's clutch basket, I posted my way of doing it with a caulking gun on his thread here - http://www.rctech.net/forum/9392323-post57.html

Nice work! Let us know how the MTKCB slipper works.

I'm curious as to the weight of the extra parts involved w/ the MTKCB.

Could you weigh the extra parts for us?

AssasinRacing

07-15-2011 05:31 PM

hey i just got this truck. my clicker clicks at low speeds and in reverse is it bad?

All times are GMT -7. It is currently 04:17 PM.

Page 313 of 2433

313