|
Does anyone have an actual length that the servo wire needs to be to get to the receiver box WITHOUT extensions? I have no issue running extensions if my Savox won't reach, but would like to know if I need to go get one now, before the truck arrives, rather than get the truck finished and have to wait for my LHS to open the next day so that I can get one...
|
Originally Posted by CraigV
(Post 9089822)
Of course, who doesn't have time for trannys? :p
:lol: |
This is torture for me, I'm thinking I'm not getting mine till next week. :cry:
|
How are the stock SC10 4x4 tires?
|
The kit tires look perfect for bashing ....
|
supposedly good for carpet too, but who would do that? lol
|
Will JR9100s, Tekin RS-pro with Redline 7.5 work on this truck?
|
I saw Randy from Tekin recommended the RX8 said the 4X4 trucks was too much for the RSpro
|
Originally Posted by JEFFs SC10
(Post 9090566)
supposedly good for carpet too, but who would do that? lol
Any recommendations for loose dry dirt w/ gravel over hardpack? I live in a high plains desert. :( |
Originally Posted by spu83
(Post 9090567)
Will JR9100s, Tekin RS-pro with Redline 7.5 work on this truck?
Originally Posted by mdwaeracer
(Post 9090594)
I saw Randy from Tekin recommended the RX8 said the 4X4 trucks was too much for the RSpro
|
Originally Posted by killerguppy
(Post 9090605)
I guess I will use them for screwing around.
Any recommendations for loose dry dirt w/ gravel over hardpack? I live in a high plains desert. :( |
Originally Posted by killerguppy
(Post 9090605)
I guess I will use them for screwing around.
Any recommendations for loose dry dirt w/ gravel over hardpack? I live in a high plains desert. :( |
Originally Posted by mfcoupe32
(Post 9089555)
getting mine today at my local hobby shop. Im 61 years old and a kid at heart. He dies with the most toys wins. at i will win at something. lol:D
Jason has 8 more since the picture in the Avitar and signing with AE. Practiced this weekend with the SC10 4x4. Jason said it drove better than his Carbon fiber SCRT10. He will be racing this weekend at the Traxxas open in Appleton WI. Using stock setup to get a baseline. Looks pretty good as shipped to tell you the truth. Keith. |
Originally Posted by Krio
(Post 9090609)
If you are indoors on a small track you will be good to go. A 13 mm high torque rotor would be a good idea too. Outdoors...meh. You will be going slow compared to everyone else trying to keep your motor cool.
The RX8 is definitely suggested when using the 550 motors. If you can keep a 540 motor cool at your track then the RS pro will suffice. Over the winter I ran an RS pro in my scrt10 4wd sct with a 5.5 sc4x motor with zero worries. However, the ambient temp was around 50 in there. lol |
Originally Posted by Chris Jarosz
(Post 9090252)
Are you putting 1 silver .030" washer on each transmission case screw? I noticed my rear transmission was tight until I put those washers on. Although it was still a bit tight to begin with after running it for 5 minutes everything freed up and rolled quite smoothly.
Hopefully can finish build tonight but have lots of kids stuff so I will see how late this old man can stay up :) |
| All times are GMT -7. It is currently 12:48 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.