R/C Tech Forums

R/C Tech Forums (https://www.rctech.net/forum/)
-   Electric Off-Road (https://www.rctech.net/forum/electric-off-road-4/)
-   -   SC10 4x4 Thread (https://www.rctech.net/forum/electric-off-road/511493-sc10-4x4-thread.html)

CoyoteSlash 02-25-2012 11:14 PM


Originally Posted by maddysdaddy (Post 10383192)
Seemed to easy, had to try. FT carbon hub piece from the B4/T4/SC10 2wds. Still have 3mm under the ballstud.

http://i43.photobucket.com/albums/e3...r/1ccc48ed.jpg

Why are you running a Pit Table in your Daughter's room? :lol:

(I only tease based off the toy box. :blush: )

IRM616 02-25-2012 11:16 PM


Originally Posted by CoyoteSlash (Post 10383241)
"ball diff"

Ball diff lube.

Yes I meant ball diff, my bad. Thanks

janga 02-25-2012 11:25 PM

What are the best tires for this sct

ilanstylz 02-25-2012 11:30 PM


Originally Posted by janga (Post 10383269)
What are the best tires for this sct

Depends on what surface your running on, and are you racing or bashing?

Thomas P 02-25-2012 11:30 PM

Indoor carpet - Kyosho SC Ultima and jConcepts Barcods, BUT the new SE slick tire, will be the new one to race indoor carpet :nod:

thats what i recomend.

CoyoteSlash 02-25-2012 11:32 PM


Originally Posted by IRM616 (Post 10383257)
Yes I meant ball diff, my bad. Thanks

Naw. I wasn't correcting. I was pointing out the self hint, Ball diff, find Ball diff lube. That's all. =D

maddysdaddy 02-25-2012 11:34 PM


Originally Posted by CoyoteSlash (Post 10383251)
Why are you running a Pit Table in your Daughter's room? :lol:

(I only tease based off the toy box. :blush: )

Lol! No worries, man. I ain't sensitive!! My daughter's little table is the perfect height to sit on the couch and do a little wrenching when the house goes to sleep! And she has too many toys, so we had to put a box in the living room. ;)
This way I can watch supercross and wrench all in the coziness of my living room...

janga 02-25-2012 11:35 PM

Racing on clay and sugar

IRM616 02-25-2012 11:56 PM


Originally Posted by CoyoteSlash (Post 10383284)
Naw. I wasn't correcting. I was pointing out the self hint, Ball diff, find Ball diff lube. That's all. =D

:):)

F_ME 02-26-2012 03:56 AM

AE Cust. Svc.
 
Chris sent me out the orange sway bars and few warranty items in a day.
Excellent customer service.

Thanks Chris!

1Fastpede 02-26-2012 07:41 AM


Originally Posted by maddysdaddy (Post 10383192)
Seemed to easy, had to try. FT carbon hub piece from the B4/T4/SC10 2wds. Still have 3mm under the ballstud.

http://i43.photobucket.com/albums/e3...r/1ccc48ed.jpg

upside down? ;)

1Fastpede 02-26-2012 07:49 AM


Originally Posted by CraigMBA (Post 10382416)
I think they are Xray PN 358182. But I'm seriously not sure. Can anyone confirm?

For what its worth at the showdown he was running x-ray "purples".. if your wanting to go that route you might want to buy a full set. he said the purples were equivalent to the AE yellows but i never confirmed it. I'de like to see a conversion chart.
At one point he even had his rear shocks mounted on the front of the rear arm. he does Alot of different things with his set-up so its hard to follow.

driver5150 02-26-2012 07:55 AM


Originally Posted by driver5150 (Post 10380922)
I did a search on chassis brace and found results. My question is, can is screw in rod ends with grub screws or do i need to screw 4-40 all thread thru cf tube.
Thanks

Any help?
Thanks

Cameron Kellogg 02-26-2012 08:02 AM


Originally Posted by 1Fastpede (Post 10384202)
For what its worth at the showdown he was running x-ray "purples".. if your wanting to go that route you might want to buy a full set. he said the purples were equivalent to the AE yellows but i never confirmed it. I'de like to see a conversion chart.
At one point he even had his rear shocks mounted on the front of the rear arm. he does Alot of different things with his set-up so its hard to follow.

That is why there are no BK setups on AE's site.

Cameron Kellogg 02-26-2012 08:04 AM


Originally Posted by driver5150 (Post 10384222)
Any help?
Thanks

There is many ways the brace is done. The inner rod is the easiest to do.


All times are GMT -7. It is currently 07:29 AM.

Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.