OMG Please help!!!!
02-06-2011, 12:48 AM
#31
The warp core is obviously malfunctioning. 
02-07-2011, 02:19 PM
#35
I had a similar problem and it was not the speed control. It may be the sensor board in your motor. Mine was dead direct from novak out of the box. By luck, the ballistic series all uise the same board and I had another one from a touring car on hand.
MMP in this configuration is known to need a capacitor or external BEC also.
MMP in this configuration is known to need a capacitor or external BEC also.
02-07-2011, 06:19 PM
#36
I had a similar problem and it was not the speed control. It may be the sensor board in your motor. Mine was dead direct from novak out of the box. By luck, the ballistic series all uise the same board and I had another one from a touring car on hand.
MMP in this configuration is known to need a capacitor or external BEC also.
MMP in this configuration is known to need a capacitor or external BEC also.
02-07-2011, 06:22 PM
#37
okay having a big problem that i can not figure out. I have a Mamba Max Pro esc and a Novak 550 4.5t sensored motor. Hooked up everything, used castle link to change to sensored with a 2s lipo and worked for half a lap..... Had to spin motor shaft by hand to get the motor to spin with the throttle... So i thought thr motor took a crap on me, bought another 550 4.5t motor... Tryed it... same thing, i have to spin the motor with my fingers and hit the throttle for it to spin... So thought it was my MMP...Bought a new one... Same freaking thing...Changed receiver's didnt work...changed lipo's...same thing... What in the heck is wrong here.... PLEASE PLEASE help pro's....
02-07-2011, 06:31 PM
#38
PFAG, useful advise 
Maybe go back to the WWF and midget porn
I'm willing to bet you've never owned a Castle product.
People like you bug
Maybe go back to the WWF and midget porn
I'm willing to bet you've never owned a Castle product.
People like you bug
02-07-2011, 08:17 PM
#39
02-07-2011, 09:26 PM
#40
Ok, lets hear what YOU have?
Could you be convinced to post a data log? With temps?
Perhaps a link to a youtube video or two?
Some posts you've done with HELPFUL advise here on RCTech?
I'm not looking for a pissing contest. But I do question your character, correct me and restore my faith in naysayers.
Could you be convinced to post a data log? With temps?
Perhaps a link to a youtube video or two?
Some posts you've done with HELPFUL advise here on RCTech?
I'm not looking for a pissing contest. But I do question your character, correct me and restore my faith in naysayers.
02-07-2011, 09:52 PM
#41
Ok, lets hear what YOU have?
Could you be convinced to post a data log? With temps?
Perhaps a link to a youtube video or two?
Some posts you've done with HELPFUL advise here on RCTech?
I'm not looking for a pissing contest. But I do question your character, correct me and restore my faith in naysayers.
Could you be convinced to post a data log? With temps?
Perhaps a link to a youtube video or two?
Some posts you've done with HELPFUL advise here on RCTech?
I'm not looking for a pissing contest. But I do question your character, correct me and restore my faith in naysayers.
02-07-2011, 10:24 PM
#42
Proving me RIGHT when you have nothing positive to add to the forum IS???
Let me give you an example of how character works....
I spend time helping others (like the thread your on dick weed), I have made YouTube vids for people to explain how to solder the large 6.5mm bullet connectors and the difference between series and parallel. I have even sent free parts to people to help them out of a bind.
I run 7 RC's, Losi 8 buggy, Losi 8T-e, Ofna Hyper 10SC, Ofna Hyper 7, Losi XXXT, an Academy SB-V2 Pro, and an Axial rock crawler.
I can show you data logs from my Hyper 7 running 8S lipo with a Mamba XL and a 1518 motor doing 80mph pulling 111amps and only running a max temp of 118'f ESC and 135'f on the motor.
I have pic's and video's to back it all up.
People like you should just read, and not post.
Let me give you an example of how character works....
I spend time helping others (like the thread your on dick weed), I have made YouTube vids for people to explain how to solder the large 6.5mm bullet connectors and the difference between series and parallel. I have even sent free parts to people to help them out of a bind.
I run 7 RC's, Losi 8 buggy, Losi 8T-e, Ofna Hyper 10SC, Ofna Hyper 7, Losi XXXT, an Academy SB-V2 Pro, and an Axial rock crawler.
I can show you data logs from my Hyper 7 running 8S lipo with a Mamba XL and a 1518 motor doing 80mph pulling 111amps and only running a max temp of 118'f ESC and 135'f on the motor.
I have pic's and video's to back it all up.
People like you should just read, and not post.
02-08-2011, 02:19 AM
#43
Proving me RIGHT when you have nothing positive to add to the forum IS???
Let me give you an example of how character works....
I spend time helping others (like the thread your on dick weed), I have made YouTube vids for people to explain how to solder the large 6.5mm bullet connectors and the difference between series and parallel. I have even sent free parts to people to help them out of a bind.
I run 7 RC's, Losi 8 buggy, Losi 8T-e, Ofna Hyper 10SC, Ofna Hyper 7, Losi XXXT, an Academy SB-V2 Pro, and an Axial rock crawler.
I can show you data logs from my Hyper 7 running 8S lipo with a Mamba XL and a 1518 motor doing 80mph pulling 111amps and only running a max temp of 118'f ESC and 135'f on the motor.
I have pic's and video's to back it all up.
People like you should just read, and not post.
Let me give you an example of how character works....
I spend time helping others (like the thread your on dick weed), I have made YouTube vids for people to explain how to solder the large 6.5mm bullet connectors and the difference between series and parallel. I have even sent free parts to people to help them out of a bind.
I run 7 RC's, Losi 8 buggy, Losi 8T-e, Ofna Hyper 10SC, Ofna Hyper 7, Losi XXXT, an Academy SB-V2 Pro, and an Axial rock crawler.
I can show you data logs from my Hyper 7 running 8S lipo with a Mamba XL and a 1518 motor doing 80mph pulling 111amps and only running a max temp of 118'f ESC and 135'f on the motor.
I have pic's and video's to back it all up.
People like you should just read, and not post.
Way to show 'em mr Carbondale Colorado!
Where do you race? Just curious...
I used to live there back in '95 and am slowly plotting my return now that I can actually afford to live there!
Btw: I have 3 MMP's and love them even though the magic smoke came out of one of them Castle customer support I had a replacement in 5 days! I even ran an MMM all summer last year with zero issues!
02-08-2011, 03:14 AM
#44
The sensor port on the MMP is garbage. That is most likely where the issue is. AT least that is what it sounds like to me. THey break very easy when plugging them in.
02-08-2011, 06:30 AM
#45
No response to that?
Way to show 'em mr Carbondale Colorado!
Where do you race? Just curious...
I used to live there back in '95 and am slowly plotting my return now that I can actually afford to live there!
Btw: I have 3 MMP's and love them even though the magic smoke came out of one of them Castle customer support I had a replacement in 5 days! I even ran an MMM all summer last year with zero issues!
Way to show 'em mr Carbondale Colorado!
Where do you race? Just curious...
I used to live there back in '95 and am slowly plotting my return now that I can actually afford to live there!
Btw: I have 3 MMP's and love them even though the magic smoke came out of one of them Castle customer support I had a replacement in 5 days! I even ran an MMM all summer last year with zero issues!
It's still covered in snow right now but I'm chomping at the bit!Here's a link to the thread here on RCTech http://www.rctech.net/forum/colorado...trol-park.html
You know that the Ute Indians here said there was a curse on Sopris mountain that if you ever slept in it's shadow you would be destined to return
