TLR 22 Racing Buggy Thread
#4621
#4627
A quick camera phone snap of my 22, with the b44 body in the process of being painted to match. Thanks to the good info in the thread, and the heads up of a buddy that I race with, I got the setup down pretty good on the car for it's first night racing, qualified 2nd, and finished 2nd in the A-Main in stock buggy. am going to experiment with lengthening the rear camber links for a little more traction coming entering the straightaway, but the car handled extremely well, and was very forgiving to drive.
#4628
Tech Master
iTrader: (77)
Losi down..Losi down Got into buggy and ran a B4.1 for about 2 months and its been 3 months since I sold it. I picked up the 22 and was leading the 3rd round (basically B main) when a got tagged after getting loose. The hit snapped the front camber block. This buggy is sweet out of the box! I'm going to be busy at work tomorrow making an alum one or molding a new one until parts become available
#4629
Tech Elite
iTrader: (92)
I just finished wiring up my car, you guys need to see this! I have just about the biggest electronics you can get:
JR9100s Servo
Spektrum SR3001 Servo
Novak GTB Speky ESC With Huge Power Cap
Spektrum Glitch Buster
Older Style AMB!
I am pretty happy with the setup though, it's actually kind of neat. Not pretty though! I will get up pics here soon, but I need to get my body back first to make sure the receiver fits the way I put it (in front of the battery box thing on a block of foam)
Super happy with the car, I had zero problems with the build, other than stripping 1 screw because of a crappy hex driver. I got a new one and no more problems. I did notice that the two front bumper screws don't seem to thread far enough up to thread completely through the nose block nuts that you insert, I'm going to put in some longer ones.
JR9100s Servo
Spektrum SR3001 Servo
Novak GTB Speky ESC With Huge Power Cap
Spektrum Glitch Buster
Older Style AMB!
I am pretty happy with the setup though, it's actually kind of neat. Not pretty though! I will get up pics here soon, but I need to get my body back first to make sure the receiver fits the way I put it (in front of the battery box thing on a block of foam)
Super happy with the car, I had zero problems with the build, other than stripping 1 screw because of a crappy hex driver. I got a new one and no more problems. I did notice that the two front bumper screws don't seem to thread far enough up to thread completely through the nose block nuts that you insert, I'm going to put in some longer ones.
#4630
any idea if they will make losi 22 stadium truck
#4631
#4632
Losi down..Losi down Got into buggy and ran a B4.1 for about 2 months and its been 3 months since I sold it. I picked up the 22 and was leading the 3rd round (basically B main) when a got tagged after getting loose. The hit snapped the front camber block. This buggy is sweet out of the box! I'm going to be busy at work tomorrow making an alum one or molding a new one until parts become available
#4633
#4635
how about a losi 24???
I cant find bodies anywhere!!!
I cant find bodies anywhere!!!