Hyper TT 4wd 1/10th Truggy Thread
#3016
Our class mandates stock shocks with open springs and oils. I'm currently running 30 front with blue cut 10sc springs and rear 25 with stock orange.
I run foam tyres so they contribute very little to soaking up bumps.
A 16 should give a good mix of accletation and speed.
I run foam tyres so they contribute very little to soaking up bumps.
A 16 should give a good mix of accletation and speed.
http://www.hobbyking.com/hobbyking/s...FApproved.html
would it work well?
Last edited by avva; 07-08-2011 at 08:06 AM.
#3017
Tech Addict
iTrader: (73)
Thanks. I am thinking of running this battery with it:
http://www.hobbyking.com/hobbyking/s...FApproved.html
would it work well?
http://www.hobbyking.com/hobbyking/s...FApproved.html
would it work well?
http://www.hobbyking.com/hobbyking/s...FApproved.html
I have both and the 40c have better punch.
#3018
It will work fine. I run this one.
http://www.hobbyking.com/hobbyking/s...FApproved.html
I have both and the 40c have better punch.
http://www.hobbyking.com/hobbyking/s...FApproved.html
I have both and the 40c have better punch.
#3019
Our class mandates stock shocks with open springs and oils. I'm currently running 30 front with blue cut 10sc springs and rear 25 with stock orange.
I run foam tyres so they contribute very little to soaking up bumps.
A 16 should give a good mix of accletation and speed.
I run foam tyres so they contribute very little to soaking up bumps.
A 16 should give a good mix of accletation and speed.
#3020
can i use a 120A hobbywing (xerun/ezrun) 1/10 esc? cause the the mmpro is somewhat $$$.
Last edited by avva; 07-09-2011 at 12:23 AM.
#3021
Joining the 10TT family
Picked a 10TT up last week. Spent most of the week trying to figure out where to mount the ESC. This is what I eventually ended up with, which I'm really happy with.
Picked a 10TT up last week. Spent most of the week trying to figure out where to mount the ESC. This is what I eventually ended up with, which I'm really happy with.
#3022
-dumbcomputers
what kv motor?
what kv motor?
#3023
#3025
Tech Apprentice
Question #1 (Mister G posted previously)
Here is a start - these are the most commonly broken parts i see during racing.
** Front knuckles
** Rear hubs - don't waste time with plastic get alloy ones.
** steering top plate - don't waste time with plastic get an alloy one.
** Front arms.
** Front hinge pins and bushes
** Front hinge pin holders (front and back)
Question #2 - The Castle MMPro and 3800 kv 1406 Motor (4 pole) - Check E-Bay price are way better than any where else.
Question #3 - Don't know, once again, if you are on a budget, keep what you've got for now.
Question #4 - I'm using a Futaba BLS451 - other options out there I'm sure.
Question #5 - If you are on a budget, than stick with the lid you have.
Good Luck!!
Here is a start - these are the most commonly broken parts i see during racing.
** Front knuckles
** Rear hubs - don't waste time with plastic get alloy ones.
** steering top plate - don't waste time with plastic get an alloy one.
** Front arms.
** Front hinge pins and bushes
** Front hinge pin holders (front and back)
Question #2 - The Castle MMPro and 3800 kv 1406 Motor (4 pole) - Check E-Bay price are way better than any where else.
Question #3 - Don't know, once again, if you are on a budget, keep what you've got for now.
Question #4 - I'm using a Futaba BLS451 - other options out there I'm sure.
Question #5 - If you are on a budget, than stick with the lid you have.
Good Luck!!
Given I've been quoted on the spares needed, ill answer a few other questions
As suggested The Castle MMPro and 3800 kv 1406 Motor (4 pole). Run it on a 16 pinion and it will be quick and run very cool - highly recommended!!
Ofna Hi-Down Force Wing part# 40906 to 40909 (4 colors) http://www.ofna.com/body-wings.php
I have been using one of theese - http://www.hobbyking.com/hobbyking/s...idProduct=8771
Its been going strong since a week after the TTs were released. It has seen 2 seasons of racing and at least 1 hour of practice a week. Value for less than $20
Associated t4 shells from proline and J Concepts, fit well if cut correctly - search this thread...
Cheers Matt
As suggested The Castle MMPro and 3800 kv 1406 Motor (4 pole). Run it on a 16 pinion and it will be quick and run very cool - highly recommended!!
Ofna Hi-Down Force Wing part# 40906 to 40909 (4 colors) http://www.ofna.com/body-wings.php
I have been using one of theese - http://www.hobbyking.com/hobbyking/s...idProduct=8771
Its been going strong since a week after the TTs were released. It has seen 2 seasons of racing and at least 1 hour of practice a week. Value for less than $20
Associated t4 shells from proline and J Concepts, fit well if cut correctly - search this thread...
Cheers Matt
also i see people running slash rear tires looks nice but seems to look more like the tires are in more closer to the body.. is there a off set hex 12mm adaptor they sell that will fit? make it bit wider out...
thanks ill be ordering my parts soon..
#3026
Tech Master
iTrader: (21)
Well, mine should turn up any day this week. So excited!
But, I've only currently got a eZRun 60A ESC and I read just a page back that people were having thermal issues I guess I need a 120A I will be using a Velineon motor (3500KV) so I think the motor should be fine.
Anyone running a 60A ESC without issue? Should I be fine to run it for a week or 2 until a new ESC arrives?
But, I've only currently got a eZRun 60A ESC and I read just a page back that people were having thermal issues I guess I need a 120A I will be using a Velineon motor (3500KV) so I think the motor should be fine.
Anyone running a 60A ESC without issue? Should I be fine to run it for a week or 2 until a new ESC arrives?
#3027
#3028
Guys, any suggestions on a 3s pack to use with a MMP/3800kv? I'm looking at the Turnigy Nano-Tech 5000mah 3S 35~70C Lipo Pack (Dimensions: 150x49x26mm) but I'm not sure if it will fit (may be a couple of mm too long)?
http://www.hobbyking.com/hobbyking/s...dProduct=17253
http://www.hobbyking.com/hobbyking/s...dProduct=17253
#3029
Tech Adept
iTrader: (2)
Well, mine should turn up any day this week. So excited!
But, I've only currently got a eZRun 60A ESC and I read just a page back that people were having thermal issues I guess I need a 120A I will be using a Velineon motor (3500KV) so I think the motor should be fine.
Anyone running a 60A ESC without issue? Should I be fine to run it for a week or 2 until a new ESC arrives?
But, I've only currently got a eZRun 60A ESC and I read just a page back that people were having thermal issues I guess I need a 120A I will be using a Velineon motor (3500KV) so I think the motor should be fine.
Anyone running a 60A ESC without issue? Should I be fine to run it for a week or 2 until a new ESC arrives?
#3030
ok greak thanks... why dont they sell MMP with a 3800KV combo??
also i see people running slash rear tires looks nice but seems to look more like the tires are in more closer to the body.. is there a off set hex 12mm adaptor they sell that will fit? make it bit wider out...
thanks ill be ordering my parts soon..
also i see people running slash rear tires looks nice but seems to look more like the tires are in more closer to the body.. is there a off set hex 12mm adaptor they sell that will fit? make it bit wider out...
thanks ill be ordering my parts soon..