Hyper TT 4wd 1/10th Truggy Thread
#1486
Tech Initiate
iTrader: (2)
Join Date: Dec 2009
Location: The mountains of Western North Carolina
Posts: 49
Trader Rating: 2 (100%+)
Do you happen to have part numbers for these wheels and tires? Thanks
#1488
Looks like a 1/12 ofna wing you can get on Tower.
http://www3.towerhobbies.com/cgi-bin...?&I=LXVCR4&P=7
http://www3.towerhobbies.com/cgi-bin...?&I=LXVCR4&P=7
#1489
Registered User
iTrader: (21)
#1490
Tech Rookie
Most parts broke on turn pipes. The big jumps and even cartwheel landings were fine. At least the rear bumper and maybe 1 suspension arm were from the big trucks smacking my car.
#1491
Tech Master
iTrader: (53)
I was indoors on a clay track Mike's Hobby shop in TX. I'm a first time driver so take my experience as a worst case scenario. I was getting a lot better near the end. Ray set my esc to max at 50%, excellent guy and a nice track too. The truggy is Super fun; no regrets.
Most parts broke on turn pipes. The big jumps and even cartwheel landings were fine. At least the rear bumper and maybe 1 suspension arm were from the big trucks smacking my car.
Most parts broke on turn pipes. The big jumps and even cartwheel landings were fine. At least the rear bumper and maybe 1 suspension arm were from the big trucks smacking my car.
#1492
MitchellY, best looking truck so far. Really like how it's done up. Will have to put that wing on my list. Great work.
#1493
Nitro TC3? who makes that? I broke my front knuckles tonight on the smallest of jumps, very dissapointed in the ofna product.
#1495
Forgive me if this has been answered.
I need to know what size screws this truck has. I need to pick up some new Hudy tools and want the correct size.
I need to know what size screws this truck has. I need to pick up some new Hudy tools and want the correct size.
#1496
Tech Rookie
1.5mm, 2mm, 2.5mm Most of the time it's 2mm hex.
#1497
Several of us just got 10TT's for x-mas, breaking every day, but thats another story. Current setup is Novak 4.5 550 motor, MMP, 14 toothe pinion. I would have thought that the vehicle would have been a bit faster than it is. So the question is, do we go with a 13 / 12 toothe pinion, or go to a 39 toothe center spur gear.
And no its not the driving that caused the vehicle to break if thats what some are thinking. This truggy is just not built that well. Period.
And no its not the driving that caused the vehicle to break if thats what some are thinking. This truggy is just not built that well. Period.
#1498
Several of us just got 10TT's for x-mas, breaking every day, but thats another story. Current setup is Novak 4.5 550 motor, MMP, 14 toothe pinion. I would have thought that the vehicle would have been a bit faster than it is. So the question is, do we go with a 13 / 12 toothe pinion, or go to a 39 toothe center spur gear.
And no its not the driving that caused the vehicle to break if thats what some are thinking. This truggy is just not built that well. Period.
And no its not the driving that caused the vehicle to break if thats what some are thinking. This truggy is just not built that well. Period.
For speed or more speed if thats what your asking about, you need to go up on the pinion but watch your temps. But if your asking more speed out of the corner then down a tooth.
#1499
Here is the breakaga story. Day one. On my truck, I got about 25 seconds of race time before the rear hub broake. I did a simple 1 foot jump, landed a bit croked, not even going that fast and the left side hub broke. So I ordered the CNC ones. same day, my buddy broke his front steering knuckle, and so did another guy. Ordered new parts. Wet out last night, front knuckle popped out 3 times. Back to the bench 3 times. Then an hour later, making a turn rubbing against the lane wall, the knuckle broke.
We race 1/8th scall, so comparing those jammin vehicles to this cannot be done. Just not satisfied with the quality of the ofna 10tt
We race 1/8th scall, so comparing those jammin vehicles to this cannot be done. Just not satisfied with the quality of the ofna 10tt