-R2-

iTrader: (4)

I quallified 2nd in truggy amatuer with my Hyper sc at Rev. I can it's a damn good car, truggies in that class were doing 38 and 39's I was doing 39 and 40's with the new Novak 550 at 25 degrees of timing 15tooth gearing and a 40c-5000 bat pack and the truggies were jumping the big triple I was not.

HYPERBOY

iTrader: (1)

SOOOOO........

Hyper = Hobao

Jammin = Hong Nor

Ofna distributes = Hyper/Jammin in US

CAK

iTrader: (1)

DJ, are the Kung's Ofna sponsored drivers?

Alon

iTrader: (2)

Any body have an experience with speed passion v10 3.5t or 6.5t?
because i can not find the sp 4.5t and i wont to run sp motor.

HYPERBOY

iTrader: (1)

Talk to Saldfork he runs their product.

SaladFork

iTrader: (9)

Yea Speed Passion has phased out the V10's. The 4.5's are pretty much gone along with the 5.5's. It's sad, those are great motors for this truck. The 3.5T is way to fast, WhiteFox tested one and said it was fun but stupid fast... and the 6.5t is going to be a to slow (for larger tracks).

If you want to run the SP, Unclecarlito has had success running the V2's which are available in 5.5t which has the same Kv rating at the 4.5t V10, it's the replacement for the V10s. You will need to use a 1/8th scale speed from what we can tell so far, I tried the 5.5 on my RS Pro and it was a no go, major heat issues with the speedo. The MMP will run it but we are still working out kinks and I can't give a recommendation while using the MMP until I test it myself.

We are also working on a ROAR solution using the V3 competition 6.5t 540's using the 12.5mm Speed Passion rotor. I should have one of these in my hands next week with the rotor and will keep everyone filled in. They will be cheaper than the Tekin Redlines with the 12.5 rotor, if testing goes well we will be offering them as a ROAR package solution for the 4x4 SC's with turn limits from 3.5t-8.5t.

lbckevin

iTrader: (107)

Yes.

unclecarlito

Actually I have run the V2 5.5 with both my ver1 speed passion Gran Tourismo and a Novak GTB " 10th scale" esc's. They worked fine with a fan on both the motor & esc.

I have been working with the new E8 esc to make it run well on 2S. I have one with the new 2500 slotless Cirtix motor in my 1/8 scale and it is smooth and fast. Glitch free running with a spectrum rx & 4S.

If not for the 2S limit at most tracks I'd even try the 2500 on 3S in the SCRT.
The math says it would be a little low as far as rpm, but I bet it would be fun to drive.

CAK

iTrader: (1)

Then I stand by my original comment...

SaladFork

iTrader: (9)

This is the problem I ran into with the Tekin RS pro on the Speed Passion V2.

+ YouTube Video

lbckevin

iTrader: (107)

Should change your statement to read "the Hyper guys"....

Ofna cars = Jammmin and Hyper

One other thing to remember...Kortz and DJ were not there , they are the two fastest Hyper drivers and well qualified.

CAK

iTrader: (1)

I realize that, I also don't see Kortz and DJ participating in sketchy tactics...

I said Ofna "GUYS" as in the Ofna sponsored drivers participating in sketchy tactics during that particular race...thats all.

BTW, where did the video go that DJ posted of the race?

Here it is in case you missed it:

http://www.youtube.com/user/mrbirdma.../2/48pHfb71E1E

Racecrafter

iTrader: (25)

He could have joined in on all of the dirty driving we experienced. I haven't seen more intentional hacking by so many drivers in.......... well, ever!

Jeremy went out and put down a great showing at the Nitro JBRL.

unclecarlito

[QUOTE=SaladFork;7454334]This is the problem I ran into with the Tekin RS pro on the Speed Passion V2.


Hmmm... I'll have to ponder that one for a while. I never used Tekin stuff, but that shouldn't make any difference. Although we are talkin' r/c electronics here. Weird stuff happens.

Hey Salad, I was wondering. Does the back window of your SUV have those little family stickers in the form of a full place setting. That would of course make you the one on the far left, correct?

How are the kids, Steak knife & Soup Spoon?
I'm gonna change my screen name to Bread plate, no, wait, Wine glass, yeah Wine glass.

I'm sorry...

HYPERBOY

iTrader: (1)

If Steve raced there wouldn't be any results, We would still be fixing our cars!