Jube

iTrader: (43)

Nitro sucks lol. The throttle and acceleration Is so inconsistant. Ebuggies are smooth and consistant!

shano83

iTrader: (8)

Randy email sent to you mate
Cheers shane cornish

golferdude1971

iTrader: (18)

Hey Guys, Im not trying to hijack this thread, but I have a netbook listed in the classifieds section. It would be the perfect solution to program your Tekin Systems.

http://www.rctech.net/forum/r-c-item...in-system.html

pirape

Is the RX8 the way to go with the SC4X tekin motor?

of there is a new esc in the works?

I need to know now

thanks

Randy_Pike

iTrader: (6)

Since the SCx4 makes so much power there's no need for the magic in sensored mode. SO I suggest the Rx8. There's no chance of it thermalling or having issues as it's way over done for the 4x4 SCT class trucks.

bigjayjay1

iTrader: (86)

Between the black and red sink speedos are their any performance difference or is it just cosmetic

Mac The Knife

iTrader: (33)

So, I already have a RSPro in my SC4X4, If I buy a SCX4 motor, I now have to buy a RX8?

Mr.xb808

iTrader: (9)

Got a tekin in for repairs and ask about the black and red heat sinks and was told they just ran out of the red ones and used black instead no difference.

Randy_Pike

iTrader: (6)

There is no difference between the Black and Red heatsinked units.

You can run the SCx4 on either the RS Pro or the Rx8.

*RC222*

i was just wondering how long it has taken most of you guys to get your repaired rx8s back from tekin? i sent mine to them about a week and a half ago and havent herd anything. im just wondering if i should contact them...

Ezrem

iTrader: (13)

Have you guys experienced any heat issues in testing using an RS Pro?

I'm debating this setup in a Ofna Hyper 10SC, and already have a semi-spare RS Pro.

micrors4guy

iTrader: (50)

the red ones just match all the other red stuff on my car. Dont tell me yall went back to the black again?

Harold R

iTrader: (10)

Got my replaced speedo in time for this weekend. Thanks Tekin for the great, fast customer service!

I ran one practice run and three qualifiers with no problem. In the main after landing a large jump I lost power. I feared I had another failure but I think it may have been a questionable wire connection on the battery. I replaced the connection today and ran it in the street for 15min with no problem.

racingnazy

iTrader: (12)

I got my losi USED from a pro driver somewhere in texas. I need to send this RX8 in to get repaired. Its the version 1 I think.

Do I need a reciept? whats the best way to send it, and to be insured that they take care of it for me?

Thanks.

LOSIRACER77

iTrader: (2)

ok guys i run a mamba monster 2650 then i got a 1800kv i raced it and the temps was 200 on the motor,110 on speed control, batt tewmp was 100.

on the tekin system with a motor close to what i got, what would the temps be???? i am racing out doors in the heat?