JConcepts Thread
#6286
Thank you
#6287
I am looking for a truggy body that will fit my Hot Bodies D8T. Which JConsepts body would work best?
#6289
Tech Adept
#6291
I'm going to need those ball cups... I hate doing ball cups but those will be worth it. i always use a rag over my ball cups when popping them so that I dont scar them. Lol
#6292
Tech Adept
are the 4 angled ball cups used to move the rear camber link away from the rear shock ?
#6293
Tech Champion
iTrader: (14)
We discontinued our D8T body; you might want to look at the Mugen body. You will have to do the front body mount mod like the PL guys do.
The new cups are working very well, but I recommend pre-tapping them or using a little bit of grease on the treads. They are made with a much harder material and are tight on the threads.
The new cups are working very well, but I recommend pre-tapping them or using a little bit of grease on the treads. They are made with a much harder material and are tight on the threads.
#6294
The standard AE tie rods will work with these?
#6297
Tech Elite
iTrader: (67)
#6299