|
Originally Posted by Murray100
(Post 10744940)
I run gold pressure points on +3mm offset rims on all 4 corners. Need suggestions on what tires to run on the front of my sc10. The pressure points up front are too twitchy for me. Thanks
|
3D short course ETA?
|
Suggestion for TLR22 tires for mod buggy? I'll be running on a fairly large outdoor track, recently built and no one has really ran on it yet except for the guys building it. They are have the grand opening in two weeks, I know this is vague, but I just need a good starting point.
I've been out of the game for a few years, so I'm still playing catch up. lol Thanks |
Originally Posted by Murray100
(Post 10744940)
I run gold pressure points on +3mm offset rims on all 4 corners. Need suggestions on what tires to run on the front of my sc10. The pressure points up front are too twitchy for me. Thanks
3D short course ETA? Suggestion for TLR22 tires for mod buggy? I'll be running on a fairly large outdoor track, recently built and no one has really ran on it yet except for the guys building it. They are have the grand opening in two weeks, I know this is vague, but I just need a good starting point. I've been out of the game for a few years, so I'm still playing catch up. lol |
Green rips up front and green DD rears. Possibly a green 3D rear.
It's hard to beat either of those tires on fresh or grooved outdoor tracks. |
PW- If I'm thinking about green 3D's for an outdoor 1/8th track that is dry, dusty, and has a bit of sand, would I be on the right track tire wise. It does develop a slight groove with a lot of traffic. Or would you recommend something with a smaller pin like the Hybrid. Temps in the High 80's Low 90's.
|
Originally Posted by Tyler Keel
(Post 10745500)
PW- If I'm thinking about green 3D's for an outdoor 1/8th track that is dry, dusty, and has a bit of sand, would I be on the right track tire wise. It does develop a slight groove with a lot of traffic. Or would you recommend something with a smaller pin like the Hybrid. Temps in the High 80's Low 90's.
|
Originally Posted by PW
(Post 10745517)
The 3D's seem to be the new go to tire for those types of tracks.
|
Originally Posted by Rob Phillips
(Post 10745165)
Suggestion for TLR22 tires for mod buggy? I'll be running on a fairly large outdoor track, recently built and no one has really ran on it yet except for the guys building it. They are have the grand opening in two weeks, I know this is vague, but I just need a good starting point.
I've been out of the game for a few years, so I'm still playing catch up. lol Thanks Adam |
PW - do SC Carvers mello out the steering of the SC some on slippery tracks? I run on track with 1/8 cars and as the day goes on Double Dees all around start to feel too aggressive in the front. Thanks for the help.
|
Any plans for 3D and/or Hybrids 1/10 4wd buggy fronts?
TIA |
Thanks Adam, actually, I was referring to the new/relocated track in Brownsburg, DK Raceway. I know back in VA, you pretty much had to run a pin tire regardless, but the soil here is a little better from what I have seen so far.
Where can I find 1/10 3Ds in green? |
Originally Posted by neu2this
(Post 10746197)
PW - do SC Carvers mello out the steering of the SC some on slippery tracks? I run on track with 1/8 cars and as the day goes on Double Dees all around start to feel too aggressive in the front. Thanks for the help.
Any plans for 3D and/or Hybrids 1/10 4wd buggy fronts? |
Where can I find info on how to choose the right inserts for my tracks, and or drive skill for a losi 8ight 2.0 B, I like running subcultures, and AKA's Impacts
|
When is a good time to use orange compound! Are track is being run dry now alittle dusty blues work but pretty much are done in two runs looking for good traction with better tire wear if possible thanks!
|
| All times are GMT -7. It is currently 02:34 PM. |
Powered By: vBulletin v3.9.3.9 Patch Level 3
Copyright © 2026 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.